Retired - Bat Manor Cuff

PROJECT B1101
Designer: Megan Milliken
Skill Level: Intermediate
This pretty cuff has a classic feel with a gothic edge to it. It features a long bat stamping curved to fit a distressed brass cuff.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

If you want to bend your cuff to adjust the size, you'll want to do it first before you shape your bat.
  1. Using the oval bracelet mandrel, gently bend and shape your antique silver plated long bat stamping to fit the shape of a solid brass flat cuff bracelet. Try to match the shape as closely as possible so that the bat stamping slides neatly onto the front of the cuff.
  2. Put the stamping aside for now, and place the cuff onto the heating tripod. Very carefully use the micro torch on the cuff, keeping the flame moving around the cuff, until the color goes darker. Allow the cuff to cool entirely before you try to touch it.
  3. Buff the cooled cuff with a Vintaj relief block until you are happy with the finish.
  4. Slide your bat stamping onto the cuff. Move it slightly to one side and apply some E6000 glue to the spots where the bat will sit in the center of the cuff. Put enough glue to stick, but not too much. Then slide the bat into place in the center and wipe away any excess glue.
  5. Allow the glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2572 - Solid Brass Flat Cuff Bracelet Base 28.5mm (1 1/8 Inch) Wide (1 Piece)
    Project uses 1 piece. You will need 1 package.

  • PND-10013 - Antiqued Silver Plated Long Bat Stamping 120x16mm (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding
  • XTL-0300 - Jeweller's Micro-Flame Butane Torch Self Igniting Refillable 6 Inch
  • XTL-0310 - Tripod With Mesh Screen 6 1/2 Inch Legs - For Heating And Soldering
  • XTL-0155 - Hard Wood Oval Bracelet Sizing Bangle Mandrel Wire Wrapping Tool
Additional Information
Theme Halloween
Ingredients JB-2572, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
The Beadsmith Solid Brass Flat Cuff Bracelet Base 28.5mm (1 1/8 Inch) Wide (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$4.84 / Package | SKU: JB-2572
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Vintaj Metal Relief Block For Filing, Buffing & Sanding
Hard Wood Oval Bracelet Sizing Bangle Mandrel Wire Wrapping Tool

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed