Retired - Deco Drops Bracelet

PROJECT B657
Designer: Julie Bean
Skill Level: Intermediate
Displaying a distinct nod to the Art Deco period, this sparkling bracelet uses right-angle weave to connect hematite and jet colored Czech glass beads which are then accented by jet glass drops. This bracelet is also very comfortable to wear on the wrist.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Note, after you complete your first row of right angle weave, wrap the beadwork around your wrist to see if it is a comfortable fit. This pattern makes a little over 6" bracelet (including clasp) and is meant to be worn snug. If you need to, add some more units of right angle weave to your pattern to make the bracelet fit.
  1. To begin, please watch the video on how to right-angle weave.
  2. Cut a comfortable amount of Wildfire thread and thread it onto your needle. I prefer to use no more then 6 feet at a time personally. If you need to tie off your thread and add more at some point, please see the video HERE on how to do this. Also place a stopper bead on the end of your thread.
  3. Based upon what you learned in the video, right angle weave 23 columns of units (a unit is a 4 bead right angle weave cluster) using Czech fire polished glass 4mm round beads in hematite. Now create a second row of right angle woven beads on top of the first. For this row, each 4 cluster should consist of 3 hematite beads (left, right, and bottom) and then the "top" bead should be a Czech fire polished glass 4mm round beads in jet black. Stitch a third row using all black beads.
  4. If you have at least a foot of thread left at this point, then proceed to the next step. If not, tie off your thread and add a new one into your beadwork.
  5. Work your thread into your beadwork until you exit the last black bead on the last row. You want to be exiting facing in towards your beading, not out towards the exterior edge. String 1 Czech glass 9mm teardrop bead in black. Pull this bead all the way down your thread until it rests up against the black bead you exited. Now thread your needle through the black bead on the other side. You are basically just sandwiching the drop bead between 2 round black beads on the long edge of your bracelet. Repeat this step until you have attached a total of 22 drop beads. Tie off your thread and incorporate the tail into the beading. See photo if needed.
  6. Thread 2 feet of thread onto a needle and work it into your beading until you exit the bead labeled A in the diagram photo #4. Next thread your needle through the top loop on one half of your tube clasp. Now go back through bead A. Next, go through bead B and bead C. Now thread your needle through the bottom loop on your tube clasp. Now go back through bead C, B, and A. Repeat the same sequence you did in the beginning of this step to reinforce your threads attaching your clasp. After you have completed attaching your clasp, work your thread into your beadwork and tie off your thread.
  7. Repeat the previous step on the other side of your necklace attaching the other half of your clasp - just make sure it is oriented properly to fit into the previously attached clasp half on the other side of your bracelet.
  8. Have a wonderful time wearing this pretty bracelet!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCP-3485 - Czech Fire Polished Glass Beads 4mm Round 'Hematite' (50)
    Project uses 94 pieces. You will need 2 packages.

  • BCP-3490 - Czech Fire Polished Glass Beads 4mm Round Jet Black (50)
    Project uses 70 pieces. You will need 2 packages.

  • BCP-0920 - Czech Glass Beads 9mm Teardrop Jet Black (50)
    Project uses 22 pieces. You will need 1 package.

  • XCR-8935 - Wildfire Thermal Bonded Beading Thread .006 Inch - Black - 50 Yd
    Project uses 16 feet. You will need 1 package.

  • FCL-5561 - Gun Metal Plated 2 Strand Tube Clasps - 16.5mm (4)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-3004 - Beadsmith English Beading Needles Assortment So Handy
Additional Information
Theme Special Occasion
Ingredients BCP-3485, BCP-3490, BCP-0920, XCR-8935, FCL-5561,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Czech Fire Polished Glass Beads 4mm Round 'Hematite' (50 pcs)
You will need 2 package(s).
1 package = 50 Pieces.
$1.89 / Package | SKU: BCP-3485
Czech Fire Polished Glass Beads 4mm Round Jet Black (50 pcs)
You will need 2 package(s).
1 package = 50 Pieces.
$1.79 / Package | SKU: BCP-3490
Czech Glass Beads 9mm Teardrop Jet Black (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$5.69 / Package | SKU: BCP-0920
Wildfire Thermal Bonded Beading Thread .006 Inch - Black - 50 Yd
You will need 1 package(s).
1 package = 1 Spool.
$9.95 / Package | SKU: XCR-8935
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-5561
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
English Beading Needles Assorted Variety Pack
$4.20 / Package | SKU: XTL-3004

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed