Retired - The Victorian Woman in Black

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place your Tear Drop crystal (so the larger part of the crystal is down) on to the head pin. Create a simple wire loop.
2. Attach the head pin to one side of the Victorian Woman Pewter piece.
3. Attach the open eye pin to the other side of the Pewter piece by opening it like a jump ring. Add 1 crystal bicone bead.
4. Then create a simple wire loop and hang one of the earrings from the earring finding hook.

• FEA-2010 - Sterling Silver French Wire Earring Hooks (10)
  Project uses 2 pieces. You will need 1 package.


• FHP-6260 - Silver Plated Open Eye Pins 21 Gauge 1.5 Inch (x50)
  Project uses 2 pieces. You will need 1 package.


• FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
  Project uses 2 pieces. You will need 1 package.


• BCZ-5615 - Preciosa Czech Crystal Beads 6mm Bicone 'Jet' Black (20)
  Project uses 2 pieces. You will need 1 package.


• BCP-5902 - Czech Fire Polished Glass Beads 10mm x 12.5mm Teardrop Jet Black (4)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose