Retired - Christmas Candy Earrings

Name: Retired - Christmas Candy Earrings
Brand: Beadaholique
SKU: E770
Availability: OutOfStock

Special Value

PROJECT E770

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Show your holiday spirit in a fun and festive way by wearing these delightful earrings featuring silver plated and enameled candy charms.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Start by removing the jump ring from your candy charm. You will not need it for this project, but keep it around for another project at a future date.
Place a bicone onto an eye pin. Create a simple wire loop after the bead.
Open the simple wire loop and attach it to the loop at the top of your charm. Close the loop back up.
On the other side of your bead, open that simple wire loop and link onto your earring hook. Close the loop back up.
Happy Holidays!

WHAT YOU'LL NEED: (scroll down for purchase options)

FEA-3015 - Silver Plated Fishhooks Earring Hooks (50)
Project uses 2 pieces. You will need 1 package.

BCZ-5601 - Preciosa Czech Crystal Beads 6mm Bicone 'Crystal AB' Clear (20)
Project uses 2 pieces. You will need 1 package.

FHP-6261 - Silver Plated Open Eye Pins 21 Gauge 2 Inch (x50)
Project uses 2 pieces. You will need 1 package.

PND-8101 - Silver Plated Enamel Charm Green Peppermint Candy 16mm (1)
Project uses 1 piece. You will need 1 package.

PND-8100 - Silver Plated Enamel Charm Red Peppermint Candy 16mm (1)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Christmas
Ingredients	FEA-3015, FHP-6261,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FEA-3015

Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)

            Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $4.86
            
             / Package | SKU: FHP-6261