Team USA Kumihimo Bracelet

PROJECT B2411
Designer: Kat Silvia
Skill Level: Intermediate
Choose your favorite colors to support your team with this Kumihimo bracelet design featuring color coordinated beads and cords.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a bracelet that measures about 6 inches. To lengthen the size of the bracelet simply add beads to each strand respectively. As you braid you can measure, noting that the clasp will add 1 inch. You will also need a toothpick or scrap of wire for this project.
  1. Begin by watching our video: How to Braid Beaded Kumihimo and Make a Bracelet.
  2. Then cut six strands of blue cord, 4 feet each. Cut one strand of red cord, 4 feet. Cut one strand of white cord, 4 feet. Bring the ends together on one side and tie an overhand knot.
  3. Place the cords in the disc as shown in the video and add your weight. You will place the red cord in between 7 and 8 slot and place the white cord in between 23 and 24. Blue cords placed in the other slots on either side of the dots.
  4. You will then add 38 beads to each of the 8 strands and wind them around the bobbins, color coordinating them with the colors of the strands.
  5. Begin the braid by braiding 1 inch of cord before adding the beads. Again, as you work measure the braid. Due to tension and tightness, a good idea is to measure as you feel you are getting close to your desired length. You may find you have to adjust the number of beads. Then continue braiding and finish with 1 inch of braiding without beads, same as you did at the beginning.
  6. Carefully take the braid off of the disc, trim the bobbins off and tie an overhand knot.
  7. To see how to finish with the magnetic clasp please watch our video: How to Finish a Kumihimo Braid to Fit into a Larger Clasp or Cord End. Take a length of super-lon cord and tie an overhand knot over the braided portion of the end of the Kumihimo without the beads. Tie a second overhand knot to secure. Then take the tails and wrap around the braided portion to bulk up the tail end. When it is the right bulk to fit in the well of the clasp, tie another knot to secure and trim the ends with your scissors.
  8. Trim the end of the braided portion so it fits inside the well of the cord end. Using a toothpick or scrap of wire, add a dab of E6000 to the well. Place the end of the braid into the cord end. Set aside. Move to the other end of the bracelet and repeat the above steps.
  9. Allow to dry for at least 24 hours before wearing for maximum bond.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JSH-0204 - Toho Round Seed Beads 8/0 25C 'Silver Lined Ruby' 8 Gram Tube
    Project uses 1 Tube. You will need 1 package.

  • JSH-0071 - Toho Seed Beads, Round 8/0 #401 'Opaque Rainbow White', 8 Grams
    Project uses 1 Tube. You will need 1 package.

  • JSH-0057 - Toho Seed Beads, Round 8/0 #28 'Silver Lined Cobalt', 8 Grams
    Project uses 2 Tubes. You will need 2 packages.

  • XCR-4245 - Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Shanghai Red / 77 Yard Spool
    Project uses 1 Spool. You will need 1 package.

  • XCR-4248 - Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - White / 77 Yard Spool
    Project uses 1 Spool. You will need 1 package.

  • XCR-4238 - Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Capri Blue / 77 Yard Spool
    Project uses 1 Spool. You will need 1 package.

  • FCL-01129 - Magnetic Clasp, Smooth Barrel Shape fits 6mm Round Cord 18.5x10mm, 1 Set, 304 Stainless Steel
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-6095 - Beadsmith Lightweight Kumihimo Round Disc Disk For Japanese Braiding and Cording 35mm Hole
  • XTL-6103 - Beadsmith No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 1 7/8 Inch (8 Pack)
  • XTL-6063 - Gator Weight For Kumihimo Braiding - 1.6 Ounces (1)
Additional Information
Theme USA/Patriotic, Summer
Ingredients JSH-0204, JSH-0071, JSH-0057, XCR-4245, XCR-4248, XCR-4238, FCL-01129, XTL-1054,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Toho Round Seed Beads 8/0 25C 'Silver Lined Ruby' 8 Gram Tube
You will need 1 package(s).
1 package = 1 Tube.
$2.59 / Package | SKU: JSH-0204
Toho Seed Beads, Round 8/0 #401 'Opaque Rainbow White' (8 Grams)
You will need 1 package(s).
1 package = 1 Tube.
$2.49 / Package | SKU: JSH-0071
Toho Seed Beads, Round 8/0 #28 'Silver Lined Cobalt' (8 Grams)
You will need 2 package(s).
1 package = 1 Tube.
$2.49 / Package | SKU: JSH-0057
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - Shanghai Red / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$4.77 / Package | SKU: XCR-4245
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - White / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$5.09 / Package | SKU: XCR-4248
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - Capri Blue / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$4.77 / Package | SKU: XCR-4238
Magnetic Clasps, Smooth Barrel Shape 18.5x10mm, Fits 6mm Round Cord, 304 Stainless Steel (1 Set)
You will need 1 package(s).
1 package = 1 Set.
$2.99 / Package | SKU: FCL-01129
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
Gator Weight For Kumihimo Braiding - 1.6 Ounces (1 pcs)

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed