Retired - Sweet Traveler Bangle

PROJECT B2224
Designer: Kat Silvia
Skill Level: Beginner
This whimsical chain bangle bracelet jangles with an earthy vibe and features the Dulce Vida Collection by TierraCast.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Looking at the bangle, there is a side where there are two stud rivets that are closed. I will use these as a point of reference for these instructions.
  1. Open one jump ring and attach it to the first open eyelet directly to the left of the center rivets. Attach one hole of the triangle link. Close the jump ring.
  2. Move one eyelet to the left and open one jump ring, attach the second hole of the triangle link. Close the jump ring.
  3. Next, move two eyelets to the left. Open one jump ring, attach the heart charm to the jump ring, and link one end link of the length of chain. Close the jump ring.
  4. Stringing the chain along the bangle, move to the right by one eyelet. Using a jump ring attach the 13th link to the bangle. Close the jump ring.
  5. Move to the right and using a jump ring attach the 19th link of the chain to the bottom hole of the triangle link. Close the jump ring.
  6. Move to the right by one eyelet. Using a jump ring attach the 28th link to the bangle. Close the jump ring.
  7. Move to the right by one eyelet. Using a jump ring attach the 41st link to the bangle. Close the jump ring.
  8. Move to the right by one eyelet. You will be back at the heart charm. Open the jump ring once again and attach the 52nd link to the bangle, behind the heart charm. Close the jump ring.
  9. Cut off any remaining chain.
Note: You will have additional chain, so you can adjust the lengths within the bangle accordingly.

WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-99915 - Antiqued Brass Curb Chain 6mm x 5mm Bulk By The Foot
    Project uses 1 Foot. You will need 1 package.

  • FJR-5175 - Antiqued Brass Open Jump Rings 7mm 19 Gauge (20)
    Project uses 7 pieces. You will need 1 package.

  • JB-2715 - TierraCast Bracelet, Round Bangle 2.5 Inches 20 Gauge, 1 Bracelet, Brass Oxide Finish
    Project uses 1 piece. You will need 1 package.

  • FCO-01200 - TierraCast Connector Link, Flora 3-Hole Triangle 11mm, 2 Pieces, Brass Oxide Finish
    Project uses 1 piece. You will need 1 package.

  • PND-0262 - TierraCast Charm, Amor Small Heart 13.5x15mm, 1 Piece, Brass Oxide Finish
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Boho
Ingredients CHA-99915, FJR-5175, JB-2715, FCO-01200, PND-0262,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Brass Curb Chain, 5mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$3.87 / Package | SKU: CHA-99915
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5175
You will need 1 package(s).
1 package = .
/ Package | SKU: JB-2715
You will need 1 package(s).
1 package = .
/ Package | SKU: FCO-01200
TierraCast Charm, Amor Small Heart 13.5x15mm, Brass Oxide Finish (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$1.29 / Package | SKU: PND-0262
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed