Retired - Austrian Crystal Slider Lariat Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Take your 2-foot length of silver box chain and feed both ends through the Austrian crystal crystal silicone-core slider bead, exiting the bead in the same direction.
2. Take 1 silver cord end and place a few drops of Super New Glue into the cup. Fit one of the ends of the chain into the cord end. Repeat this step with the other end of the chain. Let the glue dry for 1 hour.
3. Take 1 head pin and string 1 silver round bead. Using pliers, make a simple wire loop. Cut off the excess wire with flush cutters.
4. Open the simple wire loop of the bead dangle from the previous step the same way you would open a jump ring. Slide it through the attached loop of one cord end on one end of the chain. Close the wire loop.
5. Repeat steps 3-4 to attach a silver bead dangle on the other end of the chain.
6. Slide the Austrian crystal crystal slider bead down to loosen your necklace to slip the chain over your head. Pull the slider bead up to tighten the necklace into a choker. Enjoy!

• CHA-10043 - Bright Silver Plated Venetian Box Chain 2.2mm - Bulk By The Foot
  Project uses 2 feet. You will need 2 packages.


• SWBB-5276 - Austrian Crystal, 81001 BeCharmed Pave Stopper Bead For European Style Bracelets 13mm, 1 Piece, Crystal
  Project uses 1 piece. You will need 1 package.


• FCR-1601 - Beadsmith Silver Plated Barrel Cord Ends With Ring 10mm Long - Fits Up To 3mm Cord (4)
  Project uses 2 pieces. You will need 1 package.


• XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
  Project uses 1 piece. You will need 1 package.


• BMB-5054 - Silver Plated 5mm Round Metal Beads (25)
  Project uses 2 pieces. You will need 1 package.


• FHP-5314 - Silver Plated Head Pins 1 Inch/22 Gauge (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex