Retired - Stars Stripes Forever Bracelet

PROJECT B170
Designer: Andrea Morici
Skill Level: Beginner
This festive bracelet features sparkly red, white, and blue Austrian crystals nestled in star chain. To make matching earrings all you need is an additional pair of earring hooks.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut a length of the star charm chain at approximately six and a half inches long.
  2. Thread a red Austrian crystal bicone onto a ball head pin. Create the beginning of a wrapped wire loop. Create six more of these using red bicones, seven more using white bicones, and an additional seven using blue bicones.
  3. Link the bicone dangles onto the star charm chain in a red, white, and blue pattern, skipping a chain link between each dangle. Once each bicone is in place, complete each wrapped wire loop and trim off excess wire.
  4. Open two oval jump rings. Use one of the jump rings to connect the bar half of a toggle clasp to one end of the chain, use the other jump ring to connect the other half of the toggle clasp to the other end of the chain. Close both jump rings again.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHX-2012 - Antiqued Silver Plated 7mm Cut Out Star Charm Chain - Bulk By The Inch
    Project uses 7 inches. You will need 7 packages.

  • SWBI-1485 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Light Siam
    Project uses 7 pieces. You will need 1 package.

  • SWBI-14100 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Chalk White
    Project uses 7 pieces. You will need 1 package.

  • SWBI-1423 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Capri Blue
    Project uses 7 pieces. You will need 1 package.

  • FHP-3005 - Silver Plated Ball Head Pins 22 Gauge 1.5 Inch (x20)
    Project uses 21 pieces. You will need 2 packages.

  • FJR-5405 - TierraCast Rhodium Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FCL-7130 - TierraCast Antiqued Silver Plated Lead-Free Pewter 1/2 Inch Anna's Toggle Clasp (1)
    Project uses 17 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme USA/Patriotic
Ingredients FHP-3005, FJR-5405, FCL-7130,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Head Pins, with Ball Head 1.5 Inches Long and 22 Gauge Thick, Silver Plated (20 Pieces)
You will need 2 package(s).
1 package = 20 Pieces.
$2.09 / Package | SKU: FHP-3005
TierraCast Rhodium Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.97 / Package | SKU: FJR-5405
TierraCast Pewter Toggle Clasps, Anna's 12.5mm, Antiqued Silver Plated (1 Set)
You will need 1 package(s).
1 package = 1 Set.
$2.59 / Package | SKU: FCL-7130
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed