Retired - Renee Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut three strands of beading wire, 12 inches each.
2. Place all three strands into the bead stopper, equally placed.
3. On to each strand string rondelle beads in this order: 4 blue, 1 yellow, 4 blue, 1 yellow, 4 blue, 1 yellow, 4 blue, 1 yellow, 4 blue, 1 yellow, and 4 blue.
4. Take the top strand, string on one crimp tube, thread the wire up though the top loop of the triple strand reducer and back down through the crimp tube. Crimp the crimp tube. Trim the excess wire. Add a crimp cover.
5. Repeat the above step for all three strands on both sides.
6. To one end of the strand reducer open a jump ring and attach one end of the magnetic clasp. Close the jump ring. Repeat on the other side of the bracelet.
7. All done!

• BGL-10266 - Chinese Glass Beads, Faceted Rondelles 4.5x6mm, 16 Inch Strand, Opaque Royal Blue
  Project uses 72 pieces. You will need 1 package.


• BGL-10268 - Chinese Glass Beads, Faceted Rondelles 6x8mm, 16 Inch Strand, Opaque Goldenrod Yellow
  Project uses 15 pieces. You will need 1 package.


• FCO-3039 - TierraCast Fine Silver Plated Pewter 3-Strand Reducer Bead Bars 14.8mm (2)
  Project uses 1 Set. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 2 pieces. You will need 1 package.


• FCL-6680 - Silver Plated Magnetic Clasps 6mm x 8mm (3)
  Project uses 1 piece. You will need 1 package.


• FCR-1054 - Shiny Silver Tone Crimp Bead Covers 4mm (x144)
  Project uses 6 pieces. You will need 1 package.


• FCR-1715 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Silver Plated
  Project uses 6 pieces. You will need 1 package.


• XCR-69582 - Beadalon Wire Silver Plated 19 Strand .015 Inch / 15Ft
  Project uses 3 Feet. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
• XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material