Retired - Let It Snow Earrings

Name: Retired - Let It Snow Earrings
Brand: Beadaholique
SKU: E706
Availability: OutOfStock

PROJECT E706

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

There is something very elegant about a snowflake and these earrings attempt to capture that beauty. They feature a detailed snowflake stamping accented by sparkly Austrian crystal beads.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Don't forget to double these instructions to make your matched pair of earrings

Place onto a head pin: 1 Austrian crystal crystal 3mm bicone, 1 Austrian crystal round mini bead in crystal, and another bicone. Create a simple wire loop after the last bead and trim excess wire with flush cutters. Make a total of 3 of these dangles.
Look at your antique silver plate snowflake stamping and attach the 3 dangles from above to the 3 side holes in the snowflake. Just open up their simple loops the same way you would open a jump ring and connect it through the hole, then close the loop up.
Carefully snip the head off of a head pin (cut as little actual wire as possible). Create a simple wire loop on one end of your wire, place an Austrian crystal round mini bead in crystal onto the wire, and then create a simple wire loop after the bead.
Open one of the loops and slip it through the top hole on your snowflake stamping. Close the loop. Connect your earring finding to the other loop.
Happy Holidays!

WHAT YOU'LL NEED: (scroll down for purchase options)

FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
Project uses 8 pieces. You will need 1 package.

SWBB-7503 - Austrian Crystal, 5052 Round Mini Beads 6mm, 4 Pieces, Crystal
Project uses 8 pieces. You will need 2 packages.

SWBB-1000 - Austrian Crystal, 5328 Bicone Beads 2.5mm, 20 Pieces, Crystal
Project uses 12 pieces. You will need 1 package.

FCO-9811 - Antiqued Silver Plated Snowflake 3-Strand Reducer / Connector Beads 18mm (4)
Project uses 2 pieces. You will need 1 package.

FEA-3070 - Silver Plated French Wire Earring Hooks 18mm (25 Pairs)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Winter, Christmas
Ingredients	FHP-5320, FEA-3070,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Head Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)

            Head Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.49
            
             / Package | SKU: FHP-5320

Sold out

Earring Findings, French Wire Hooks 22mm, Silver Plated (25 Pairs)

            Earring Findings, French Wire Hooks 22mm, Silver Plated (25 Pairs)
        
You will need 1 package(s).
1 package = 25 Pairs.

                $3.19
            
             / Package | SKU: FEA-3070