Retired - Jessa Bracelet and Earring Set

Retired - Jessa Bracelet and Earring Set

Name: Retired - Jessa Bracelet and Earring Set
Brand: Beadaholique
SKU: S608
Availability: OutOfStock

PROJECT S608

Designer: Julie Bean

Save to Wishlist

Printer Friendly PDF
(if available)

This bracelet and earring set is one of those go-with-everything designs that you will wear over and over again. The pearls add a touch of classic elegance to the set while the chain links make it more modern and fresh.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This project makes an approximately 7 inch bracelet. If you want a longer bracelet, you have two choices. You can make it longer by adding extra jump rings near the clasp and creating a small "chain" of jump rings. Enough jump rings come with your supplies to make at least an extra inch. You can also opt to purchase a second strand of pearls and create more pearl links.

To make this bracelet and earring set, please watch the video: How to Make the Jessa Earrings using Link Connector Chain.
This video will show you how to make the earrings. Please make them as shown in the video.
The video will also show you the construction of the bracelet, please refer to the video and also follow the instructions below.
Create 19 pearl links with eye pins. Separate out 20 (by cutting the jump ring between) chain links.
As seen in the video, create one pearl/chain link segment in the following order: pearl, link, pearl, link, pearl, link, pearl, link, pearl, link, pearl, link, pearl. Now create two pearl/chain link segments in the following order: link, pearl, link, pearl, link, pearl, link, pearl, link, pearl, link, pearl, link.
Separate the two halves of your tube clasp. Use jump rings to attach the pearl/link chain segments to each side of the clasp. The two chain segments that end in links should be on the outer two loops of the chain with the segment that ends in pearls in the middle. Please look at the video or photo for reference.
Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

FHP-6287 - Antiqued Brass Open Eye Pins 22 Gauge 2 Inch (x50)
Project uses 21 pieces. You will need 1 package.

FJR-5470 - Antiqued Brass Open Jump Rings 4mm 20 Gauge (x100)
Project uses 6 pieces. You will need 1 package.

FCL-5511 - Antiqued Brass Tube Clasp 22mm Three Rings Strands (2)
Project uses 1 piece. You will need 1 package.

BCP-12103 - Dazzle It! Czech Glass Pearls, 8mm Round, 1 Strand, Powder Almond
Project uses 1 strand. You will need 1 package.

CHA-10002 - Antiqued Brass Flower Link & Connector Chain 14.3x5.5mm Bulk By The Foot
Project uses 2 feet. You will need 2 packages.

FEA-3062 - Antiqued Brass Fish Hook Earring Hooks (50)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Vintage Look
Ingredients	FHP-6287, FJR-5470, FCL-5511, BCP-12103, FEA-3062,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Open Eye Pins, 2 Inches Long and 22 Gauge Thick, Antiqued Brass (50 Pieces)

            Open Eye Pins, 2 Inches Long and 22 Gauge Thick, Antiqued Brass (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $6.49
            
             / Package | SKU: FHP-6287

Sold out

Antiqued Brass Open Jump Rings 4mm 20 Gauge (100 pcs)

            Antiqued Brass Open Jump Rings 4mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $7.79
            
             / Package | SKU: FJR-5470

Sold out

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FCL-5511

Dazzle It! Czech Glass Pearls, 8mm Round, Powder Almond (1 Strand)

            Dazzle It! Czech Glass Pearls, 8mm Round, Powder Almond (1 Strand)
        
You will need 1 package(s).
1 package = 1 Strand.

                $2.89
            
             / Package | SKU: BCP-12103

Sold out

Earring Findings, Fish Hook Ear Wire 15x15mm, Antiqued Brass (25 Pairs)

            Earring Findings, Fish Hook Ear Wire 15x15mm, Antiqued Brass (25 Pairs)
        
You will need 1 package(s).
1 package = 25 Pairs.

                $6.59
            
             / Package | SKU: FEA-3062

Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers

$6.49 / Package | SKU: XTL-5514

Sold out

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

$6.49 / Package | SKU: XTL-5511

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)

$16.85 / Package | SKU: XTL-5600

You recently viewed

Clear recently viewed

1 second ago