Jack Earrings (Reboot)

PROJECT E3012
Designer: Karlin Jones
Skill Level: Beginner
These pumpkin charm earrings add the perfect touch of Halloween spirit to your look. They're simple to make and fun to wear. Now updated with PRESTIGE crystals.
Reboot: We have replaced the original discontinued Hyacinth bicone with a brighter Fire Opal bicone.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by stringing your orange bicone onto your eye pin.
  2. Create a simple wire loop (at the top using your round nose pliers. Snip off any excess wire using your flush cutters.
  3. Then open up a jump ring with your chain nose pliers and slide it through the simple wire loop on the bottom of your orange bicone bead. Then slide on your pumpkin charm and close the jump ring.
  4. Next open up the loop in your earring hook (like you would a jump ring) and slide it onto the simple wire loop on top of your orange bicone bead. Close your earring hook back up.
  5. Your earring is now ready.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWBB-16075 - Austrian Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Hyacinth
    Project uses 2 pieces. You will need 1 package.

  • FEA-3015 - Earring Hooks, Fishhook Style ttMMxttMM, 25 Pairs, Silver Plated
    Project uses 2 pieces. You will need 1 package.

  • PND-5966 - TierraCast Antiqued Silver Lead-Free Charm - Jack O' Lantern Pumpkin Halloween 18mm (2)
    Project uses 2 pieces. You will need 1 package.

  • FHP-6267 - Silver Plated Open Eye Pins 22 Gauge 2 Inch (x50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Halloween
Ingredients FEA-3015, PND-5966, FHP-6267, FJR-5150, PRES-5328-FIRE6,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Hooks, Fishhook Style 15MMx17MM, Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 50 Pieces.
$4.94 / Package | SKU: FEA-3015
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-5966
Open Eye Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.69 / Package | SKU: FHP-6267
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.39 / Package | SKU: FJR-5150
You will need 2 package(s).
1 package = .
/ Package | SKU: PRES-5328-FIRE6
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed