Retired - In Flight Earrings

PROJECT E3005
Designer: Karlin Jones
Skill Level: Beginner
This cute earring has a space shuttle bead hanging off of a dainty chain. It's super fun and swings delightfully when you wear it.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by cutting 2 inches of your chain using your flush cutters. This cable chain has a silver ball detail, so be sure to cut the wire leaving one silver ball and a larger link on either end. You may need to remove a few links leaving your chain at a little under 2 inches when you're done. Set your chain aside.
  2. Take your headpin and string in order: 1 Austrian crystal silver night bicone, 1 Austrian crystal light turquoise bicone, 1 shuttle bead, 1 Austrian crystal light turquoise bicone, and another crystal silver night bicone.
  3. Once all your beads are on your head pin, take your round nose pliers and make a simple wire loop. Snip off any excess using your flush cutters.
  4. Open your loop (the same way you would open a jump ring), slide on the last link of your cut chain piece and close your loop back up.
  5. Next, open up the loop on your earring hook (like you would a jump ring) and slide on the last link from other end of your chain.
  6. Close the loop with your chain nose pliers. Your earring is now ready!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-98958 - Silver Plated Flat Link Cable Chain With Ball 1.8mm - Sold By The Foot
    Project uses 4 inches. You will need 1 package.

  • BWC-3029 - Glazed Ceramic Bead - Tiny Space Shuttle 13.5x17.5mm (2)
    Project uses 2 pieces. You will need 1 package.

  • FHP-05326 - Silver Plated Head Pins - 21 Gauge 3 Inches (25)
    Project uses 2 pieces. You will need 1 package.

  • SWBB-16998 - Austrian Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Crystal Silver Night
    Project uses 4 pieces. You will need 1 package.

  • SWBI-14321 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Light Turquoise
    Project uses 4 pieces. You will need 1 package.

  • FEA-3015 - Silver Plated Fishhooks Earring Hooks (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients FHP-05326, FEA-3015,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Head Pins, 3 Inches Long and 21 Gauge Thick, Silver Plated (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$3.19 / Package | SKU: FHP-05326
Earring Hooks, Fishhook Style 15MMx17MM, Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 50 Pieces.
$4.94 / Package | SKU: FEA-3015
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed