Herringbone Wire Wrapped Bracelet

PROJECT B618
Designer: Julie Bean
Skill Level: Beginner
Sleek and modern, this dramatic silver and black bracelet features Austrian crystal faux pearls which have been herringbone wire wrapped and then linked together. Finishing off the bracelet is a custom made clasp.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Before beginning this project, watch the video here on how to Herringbone wire wrap a bead. Following the technique you learned in the video, cut an approximately 22 inch length of 24 gauge wire and herringbone wrap an 8mm Austrian crystal faux pearl in mystic black. Make a total of 6 of these (for an 8 inch bracelet). If you have a particularly small wrist, you will probably only need 5 total (makes a 7 inch bracelet).
  2. Open a 4mm antique silver plated jump ring. Attach two of your herringbone wrapped beads together via their end loops. Do this to all your herringbone wrapped beads so that they are all linked together via jump rings forming the main body of your bracelet.
  3. Please watch this next video on how to make a clasp for this bracelet. Using 18 gauge silver colored wire, make both parts of the clasp shown in the video.
  4. Use a 4mm jump ring to attach one half of the clasp to each side of your bracelet.
  5. All done! It's amazing what you can do with wire!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWP-8072 - Austrian Crystal, 5810 Round Faux Pearl Beads 8mm, 25 Pieces, Mystic Black
    Project uses 6 pieces. You will need 1 package.

  • WNT-1830 - Beadsmith Tarnish Resistant Silver Color Copper Wire 18 Gauge 10 Yards (9.1 Meters)
    Project uses 1 foot. You will need 1 package.

  • WNT-2430 - Beadsmith Tarnish Resistant Silver Color Copper Wire 24 Gauge 30 Yards (27.4 Meters)
    Project uses 11 feet. You will need 1 package.

  • FJR-3092 - Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 7 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-2152 - Beadsmith Jeweler's Chasing Hammer - 1 Inch Head - Metal Smithing
  • XTL-0264 - Eurotool Dual Utility Bench Block 3 x 3 Inches - Steel Anvil With Wood Base
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Special Occasion
Ingredients WNT-1830, WNT-2430, FJR-3092, PRES-5810-MBLACK8,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Wire Elements, Tarnish Resistant Silver Color Copper Wire, 18 Gauge 10 Yards (9.1 Meters)
You will need 1 package(s).
1 package = 1 Spool.
$10.45 / Package | SKU: WNT-1830
Wire Elements, Tarnish Resistant Silver Color Copper Wire, 24 Gauge 30 Yards (27.4 Meters)
You will need 1 package(s).
1 package = 1 Spool.
$10.25 / Package | SKU: WNT-2430
Antiqued Silver Plated Open Jump Rings 4.5mm 21 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$1.49 / Package | SKU: FJR-3092
PRESTIGE Crystal, #5810 Round Pearl Bead 8mm, Mystic Black (1 Piece)
You will need 6 package(s).
1 package = 1 Piece.
$0.37 / Package | SKU: PRES-5810-MBLACK8
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed