Retired - Golden Reeds Cuff

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before beginning this project, please watch our video: how to use Crystal Clay.
2. To see how to create this cuff bracelet, please watch the video: how to embed wire and rhinestone cup chain into Crystal Clay and make a cuff bracelet by Becky Nunn. In the video you will learn how to texturize and cut your wire "reeds," cut rhinestone cup chain, and mold Crystal Clay into a Nunn Design channel cuff bracelet. You will also learn how to embed wire and cup chain pieces into Crystal Clay.
3. When your bracelet is finished, let the clay cure 14 to 16 hours, or overnight.
4. Enjoy your bracelet!

• JB-2676 - Nunn Design Antiqued Silver Plated Channel Cuff Bracelet - 2 1/2 Inch
  Project uses 1 piece. You will need 1 package.


• WCR-2033 - Artistic Wire, Copper Craft Wire 20 Gauge Thick, 6 Yard Spool, Tarnish Resistant Brass
  Project uses 12 inches. You will need 1 package.


• CHA-10109 - Czech Crystal Brass Rhinestone Cup Chain 24PP Crystal (By The Foot)
  Project uses 1 inch. You will need 1 package.


• TRC-230 - Crystal Clay 2-Part Epoxy Clay Kit 'Black' 25 Grams
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-0277 - ImpressArt Brass Hammer For Metal Stamping - 1 Pound - 1 Piece
• XTL-0250 - Eurotool Bench Block Helper - Rubber Base With Interchangeable Steel And Nylon Blocks