Click or scroll to zoom
Tap or pinch to zoom
Retired - Gold Breathe Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Gold Breathe Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Gold Breathe Necklace
Retired - Gold Breathe Necklace

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Gold Breathe Necklace

PROJECT N2103
Designer: Kat Silvia
Skill Level: Beginner
This delicate necklace comes together so quickly and easily with the use of a finished chain.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by finding the center of the finished chain. Using your flush cutters, cut the center link.
  2. Open one oval jump ring and attach one end of the chain to one loop of the connector bar. Close the jump ring. Repeat on the other side.
  3. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-1293 - TierraCast Pewter, Connector Link with Breathe Text 40x11.5mm, 1 Piece, 22K Gold Plated
    Project uses 1 piece. You will need 1 package.

  • AXC-0002 - Gold Plated Flat Fine Cable Chain Necklace - 2x1.5mm Oval Links (16 Inches)
    Project uses 1 piece. You will need 1 package.

  • FJR-3917 - 22K Gold Plated Open Jump Rings Oval 5x8mm 21 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Yoga, Under $20 - Designer Picks, Personalization
Ingredients FCO-1293, FJR-3917,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FCO-1293
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-3917
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$16.85 / Package | SKU: XTL-5600
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.49 / Package | SKU: XTL-5511
The Beadsmith Jewelry Fine Round Nose Micro Pliers
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

Sold out
from

TierraCast Pewter, Connector Link with Breathe Text 40x11.5mm, 1 Piece, Antiqued Copper Plated
$2.49

TierraCast Pewter, Connector Link with Breathe Text 40x11.5mm, 1 Piece, Antiqued Copper Plated

Made in America

Lead-free TierraCast pewter, plated with copper in an antiqued finish. This rectangular connector link has the word "Breathe" on the front. Hole...

View full details

You recently viewed

Clear recently viewed