Retired - Glamorous Starfish Earrings

PROJECT E3033
Designer: Karlin Jones
Skill Level: Beginner
Make these earrings by combining a gorgeous Beadelle Crystal pave bead with a whimsical black sea glass starfish bead. The result is an unexpected mix of glamor and whimsy.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. With your flush cutters, cut two lengths of chain that each measure 11 links long.
  2. With your chain nose pliers, open the loop on your earring hook and slide on the last link from one end of one length of chain. Close the loop back up. Set aside.
  3. Next, using your flush cutters, snip off the head of a headpin and create a simple wire loop with your round nose pliers. Snip off any excess wire with your flush cutters.
  4. Slide on your sea glass starfish bead and then create another simple wire loop. Make sure to make this loop as close to the back center of the starfish bead as you can. Snip off any excess wire with your flush cutters.
  5. Open the simple wire loop at the top of the starfish bead (how you would a jump ring) and slide on the last link from the other end of that same length of chain. Close the loop back up.
  6. Next, open the simple wire loop that is on the bottom portion of your starfish bead, (again, like how you would a jump ring) and slide on the last link from one side of your second length of chain and close.
  7. Then slide onto a headpin: 1 seed bead, 1 beadelle pave bead and another seed bead. Create a simple wire loop with your round nose pliers, and snip off any excess wire.
  8. Open the simple wire loop (again, how you would a jump ring) and slide on the last link from the other side of the length of chain that is attached to the bottom of your starfish bead. Close the loop with your pliers. Refer to the photo for assistance.
  9. You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9706 - Antiqued 22K Gold Plated Round Rolo Chain 2mm Bulk By The Foot
    Project uses 2 inches. You will need 1 package.

  • BGL-10100 - Cultured Sea Glass, Large Starfish Beads 20mm, 4 Pieces, Jet Black
    Project uses 2 pieces. You will need 1 package.

  • BDLL-6102 - Beadelle Crystal 10mm Round Pave Bead - Chocolate Brown / Lt Col. Topaz (1 Pc)
    Project uses 2 pieces. You will need 2 packages.

  • FEA-3071 - 22K Gold Plated French Wire Earring Hooks 18MM (25 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5215 - 22K Gold Plated Head Pins - 22 Gauge/1.5 Inches (50)
    Project uses 4 pieces. You will need 1 package.

  • BCS-9001 - Czech Tri-Cut Seed Beads 10/0 'Gold Premium' (1 Strand/360 Beads)
    Project uses 4 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Special Occasion, Nautical
Ingredients CHA-9706, FEA-3071, FHP-5215, BCS-9001,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: CHA-9706
Earring Findings, French Ear Wire Hook 22mm, Gold Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$4.84 / Package | SKU: FEA-3071
Head Pins, 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$4.27 / Package | SKU: FHP-5215
You will need 1 package(s).
1 package = .
/ Package | SKU: BCS-9001
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed