Retired - English Rose Earrings

PROJECT E652
Designer: Julie Bean
Skill Level: Beginner
The highly detailed brass connector link which is used as focal point for these earrings is stunning when combined with lovely Austrian crystals. The hammered flowers are as pretty on the front side as the back.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Remember to double the instructions below to make your matched pair of earrings!
  1. Take one brass eye pin and place onto it 1 Austrian crystal crystal 5mm bicone bead in ruby. Create a simple wire loop right after the bicone. Cut off excess wire with flush cutters.
  2. Take another eye pin and create a simple wire loop right after the pre-made loop. Make this one about twice the size of the pre-made one. Cut off excess wire with flush cutters.
  3. Open the loop you just made in the previous step and slide onto it your Austrian crystal crystal pear shaped pendant in ruby. Close the loop back up. Now open the other loop (the one pre-made on the eye pin) and connect it to one of the loops on the brass connector link. Close the loop back up.
  4. On the other side of your brass connector link, attach the piece you made in the first step with the 5mm bicone via the simple wire loop.
  5. Finally, open the loop at the base of your brass earring hook and connect it to the simple loop at the other end of your 5mm bicone from the step above.
  6. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-8640 - Antiqued Brass Pendant Connector Link Hammered Flowers 26.5mm (1)
    Project uses 2 pieces. You will need 2 packages.

  • FEA-3060 - Antiqued Brass French Wire Earring Hooks 16mm (10 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FHP-6280 - Antiqued Brass Open Eye Pins 21 Gauge 1 Inch (x50)
    Project uses 4 pieces. You will need 1 package.

  • SWBB-1587 - Austrian Crystal, 5328 Bicone Beads 5mm, 20 Pieces, Ruby
    Project uses 2 pieces. You will need 1 package.

  • SWC-4087 - Austrian Crystal, 6106 Pear Pendant 16mm, 2 Pieces, Ruby
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Vintage Look
Ingredients FEA-3060,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Findings, French Ear Wire Hook 16mm, Antiqued Brass (20 Pcs)
You will need 1 package(s).
1 package = 10 Pairs.
$2.69 / Package | SKU: FEA-3060
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed