Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available,
may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND
OTHER SUPPLIES sections for current availability.
This necklace just slips over the head and measures around 24 inches long. If you want, you have enough beads to make it longer. You can also easily modify the design to make it shorter and add a clasp.
- Begin by taking your ribbon and making a lark's head knot with it around your Nunn Design organic hoop. Try to make it in the center of the ribbon so that you have even length tails—however, you will not be using all your ribbon and if there is a particular area of the ribbon you like best (it has multiple colors), then you can center the knot there. Please just make sure to leave at least 10 to 12-inch tails on either side of your ribbon.
- Go to one end of your silk ribbon and slide a twisted rope jump ring onto it. Pull it down so that it is about 6 to 7 inches from the organic hoop. Please watch the video: How to Finish Silk Ribbon Ends with Wire. This video will show this necklace in it and you will be doing the fold over technique, not tying knots. It will also show how to trim the silk. Create your wire wraps according to the video instructions. Please also choose if you want messy wraps, smaller wraps, or neat and tidy wraps—it is entirely up to you. Create wire wraps (with jump rings inserted) on both sides of your organic hoop.
- Next, please cut a 4-inch piece of wire. Onto one end of it, create a wrapped wire loop. Slide on 1 small rondelle bead, 1 large rondelle bead, and 1 small rondelle bead onto the wire. Create another wrapped wire loop after the last bead. You can see how to do this in the video: How to Make Your Own Gemstone Chain with Wrapped Wire Loops. You will only be making the individual links at this stage, not connecting them together. Please make a total of 12 individual beaded links with wrapped wire loops on each side.
- Next, please cut a 2-inch piece of wire and create a simple wire loop on one end. You can see how to this in the video: How to Turn Scrap Pieces of Wire into Head Pins and Eye Pins for Jewelry Making. This video will show you how to make a simple wire loop on one end of the wire. Please then string on 3 seed beads and create a simple wire loop on the other side. Trim off excess wire. Make a total of 11 of these seed bead links.
- We are now going to connect our links together and make a beaded link chain. To do this, open a simple wire loop on a seed bead link (the same way you would open a jump ring) and connect it to one of the wrapped wire loops on one of the Czech bead links. Close the loop. Repeat this pattern, connecting all your links together in the following pattern: Czech bead link, seed bead link, Czech bead link, seed bead link, etc. You will start and end you chain with a Czech bead link.
- Open one of the twisted rope jump rings attached to your ribbon and slip on one of the wrapped wire loops on one end of your beaded link chain. Close the jump ring.
- Repeat the previous step on the other side of your necklace. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- WCR-4595 - Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, Gold Color (8 Yard Spool)
Project uses 1 piece(s). You will need 1 package(s).
- SLK-146 - Hand-Dyed Silk Ribbon, 20mm Wide, Tequila Sunrise Orange/Turquoise/Brown Blend (32-36 Inch Strand)
Project uses 1 piece(s). You will need 1 package(s).
- FJR-3045 - Nunn Design Jump Ring, Twisted Rope Open 17 Gauge, 8mm Antiqued Gold (10 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- PND-3412 - Nunn Design Open Frame, Grande Organic Hoop, 28.5mm, Antiqued Gold (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- BCP-1249 - Czech Fire Polished Glass, Donut Rondelle Beads 8.5x5.5mm Light Teal (1 Strand)
Project uses 12 piece(s). You will need 1 package(s).
- BCP-2938 - Czech Glass Beads, Faceted Rondelle 3x5mm, Amber Crystal, Picasso, 1 Str, by Raven's Journey
Project uses 24 piece(s). You will need 1 package(s).
- MTB-0012 - Czech Glass Matubo, 10/0 Seed Bead, Gold Shine Red (2.5 Inch Tube)
Project uses 1 tube. You will need 1 package(s).
RECOMMENDED TOOLS:
- XTL-L52L - The BeadSmith Casual Comfort Round Nose Pliers
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.
