Retired - Dots and Loops Earrings

PROJECT E7025
Designer: Rachel Zaimont
Skill Level: Intermediate
Colorful gemstones dangle from paddle head pins in these fun, mod earrings that swing when you wear them.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Cut one 3 inch length of 22 gauge wire. Straighten the wire with nylon jaw pliers if necessary.
  2. Hold the wire in place on your steel bench block. Use your chasing hammer to flatten the last 1/4 inch of the wire until the flattened tip is 1mm wide, creating a paddle head pin. Use a flat metal file to file the tip of the wire so it is smooth and rounded.
  3. String one amazonite long drop bead onto the head pin. Measure 3/4 inch from the top of the bead and cut off the rest of the wire with flush cutters.
  4. Using pliers, create a simple wire loop at the top of the head pin, perpendicular to the flat front of the paddle. Set this component aside.
  5. Cut three 2 inch pieces of 22 gauge wire.
  6. Repeat step 2 three more times, creating three more paddle head pins.
  7. Take one head pin and string one carnelian bead. Measure 1/2 inch from the top of the bead and cut off the rest of the wire with flush cutters. Repeat step 4, creating a perpendicular wire loop at the top.
  8. Take another head pin and string one carnelian bead. Measure 5/8 inch from the top of the bead and cut off the rest of the wire with flush cutters. Repeat step 4, creating a perpendicular wire loop at the top.
  9. Take the last head pin and string one carnelian bead. Measure 3/4 inch from the top of the bead and cut off the rest of the wire with flush cutters. Repeat step 4, creating a perpendicular wire loop at the top.
  10. Open a 5mm jump ring. String the 5/8 inch head pin, the amazonite drop head pin, the 3/4 inch head pin, and then the 1/2 inch head pin. Close the jump ring. (For your second earring, string these components in the opposite order if you like.)
  11. Open the loop of an earring hook. Slide it onto the 5mm jump ring from the previous step. Close the loop.
  12. Enjoy your earrings!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SPAZ-08001 - Amazonite Gemstone Beads, Faceted Drops 6.5x17.5mm, 6 Pieces, Aqua Green
    Project uses 2 pieces. You will need 1 package.

  • SPCA-08004 - Carnelian Gemstone Beads, Round 4.5mm, 15 Inch Strand, Red Orange
    Project uses 6 pieces. You will need 1 package.

  • WCR-2233 - Artistic Wire, Copper Craft Wire 22 Gauge Thick, 8 Yard Spool, Tarnish Resistant Brass
    Project uses 18 inches. You will need 1 package.

  • FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
    Project uses 2 pieces. You will need 1 package.

  • FEA-3030 - 22K Gold Plated Long Elegant Earring Hooks 25mm (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
  • XTL-0101 - Five Piece Mini Needle File Set On Key Ring 4 Inch
  • XTL-2152 - Beadsmith Jeweler's Chasing Hammer - 1 Inch Head - Metal Smithing
  • XTL-0250 - Eurotool Bench Block Helper - Rubber Base With Interchangeable Steel And Nylon Blocks
Additional Information
Theme Summer
Ingredients WCR-2233, FJR-5250, FEA-3030,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Artistic Wire, Copper Craft Wire 22 Gauge Thick, Tarnish Resistant Brass (8 Yard Spool)
You will need 1 package(s).
1 package = 1 Spool.
$4.47 / Package | SKU: WCR-2233
22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.94 / Package | SKU: FJR-5250
Earring Findings, Long Earring Hooks 25mm, Gold Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$10.49 / Package | SKU: FEA-3030
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
Five Piece Mini Needle File Set On Key Ring 4 Inch
$10.99 / Package | SKU: XTL-0101

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed