Retired - Annalisa Earrings

PROJECT E3036
Designer: Karlin Jones
Skill Level: Beginner
Make these vintage-inspired long drop earrings by combining Czech glass beads in Olivine and Jet Black and unique brass dangle charms by Vintaj. The outcome is a sleek, yet ornate accessory.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by watching the video on How to Use the Vintaj Relief Block.
  2. Following what you learned in the video, use the side of your Vintaj relief block to sand the raised areas of your Vintaj stampings to show off the detail. Set the stampings aside for now.
  3. Open the loop at the bottom of your earring hook (how you would a jump ring) and slide on the top loop from your Vintaj chandelier drop charm. Close the loop back up.
  4. Next, open up a jump ring with your flat nose pliers and slide on the loop from one Vintaj long drop charm and also the bottom left loop of your Vintaj chandelier drop charm. Close the jump ring.
  5. Open another jump ring and repeat the above step with your second Vintaj long drop and the bottom right loop from your Vintaj chandelier drop charm. Close the jump ring.
  6. Next, take a 3� brass headpin and slide on the following: 1 Jet Black teardrop bead, 1 Olivine bicone bead, 1 Jet Black teardrop bead, 1 Olivine bicone bead, 1 Jet Black teardrop bead and 1 Olivine bicone bead.
  7. Once all the beads are on, create a simple wire loop with your round nose pliers. Snip off any excess wire with your flush cutters. (LINK)
  8. Open the simple wire loop (like you would a jump ring) and slide it onto the middle loop of your Vintaj chandelier drop charm and close.
  9. You're done.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7113 - Vintaj Natural Brass Ornate Long Etched Dangle Drop Charms 36mm (2)
    Project uses 4 pieces. You will need 2 packages.

  • PND-7340 - Vintaj Natural Brass Metamorphis Chandelier Drop Charms 35.5mm (2)
    Project uses 2 pieces. You will need 1 package.

  • BCZ-5646 - Preciosa Czech Crystal Beads 6mm Bicone 'Olivine' Green (20)
    Project uses 6 pieces. You will need 1 package.

  • BCP-5802 - Czech Fire Polished Glass Beads 8 x 6mm Teardrop Jet Black (20)
    Project uses 6 pieces. You will need 1 package.

  • FJR-5471 - Antiqued Brass Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 6 pieces. You will need 1 package.

  • FEA-3310 -
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding
Additional Information
Theme Vintage Look
Ingredients PND-7113, PND-7340, BCP-5802, FJR-5471,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Natural Brass Ornate Long Etched Dangle Drop Charms 36mm (2 pcs)
You will need 2 package(s).
1 package = 2 Pieces.
$4.99 / Package | SKU: PND-7113
Vintaj Natural Brass Metamorphis Chandelier Drop Charms 35.5mm (2 pcs)
You will need 1 package(s).
1 package = 2 Pieces.
$4.17 / Package | SKU: PND-7340
Czech Fire Polished Glass Beads 8 x 6mm Teardrop
You will need 1 package(s).
1 package = 25 Pieces.
$4.47 / Package | SKU: BCP-5802
Antiqued Brass Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.29 / Package | SKU: FJR-5471
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
Vintaj Metal Relief Block For Filing, Buffing & Sanding

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed