Just Beachy Beaded Kumihimo Necklace (Reboot)

PROJECT N2100
Designer: Kat Silvia
Skill Level: Intermediate
This long beaded Kumihimo necklace will have you looking like you just stepped off a fabulous Yacht. Style with an easy summer dress to add a classic nautical look to your warm weather style.
Reboot: Please note that we have rebooted this project with a more delicate gold chain and Preciosa Crystal Golden Flare bicones which have a partial gold coating vs. the solid coat shown in the photos.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is up to 38 inches in length if you use all 2 feet of chain. If you wish to alter the length of this necklace, it is easiest to do so by adjusting the length of chain and not the beaded portion. You will also need a toothpick or scrap of wire to complete this project.
  1. To start this project, please watch the video How to Braid Beaded Kumihimo and Make a Bracelet. You will not be making the bracelet but the technique is the same.
  2. Cut 8 strands of Super-Lon Cord, 4 feet long each.
  3. Take the 8 cord strands you just cut and tie a simple overhand knot on one end to secure them together. Place the knot through the middle hole of the Kumihimo disk and secure gator weight to the knot.
  4. Place the 8 strands into the notches of the kumihimo disc. One strand on either side of each of the four dots on the disc.
  5. Now you will add the beads on each strand and wind the bobbins.
  6. For the four strands between 31-32, 32-1 and 15-16, 16-17 - these strands will contain 30 blue beads, followed by 18 gold beads and then 30 more blue beads.
  7. For the four strands between 7-8, 8-9 and 23-24, 24-25 - these strands will contain 30 white beads, followed by 18 gold beads and then 30 more white beads.
  8. Begin the braiding as shown in the video. You will braid about 1 inch of cord before adding the beads. When you have the strands back in their original orientation you will begin adding the beads to get the spiral pattern.
  9. When you have added all the beads, finish the braid by completing 1 inch of braiding with the cord.
  10. Trim off the bobbins, remove the cords from the disc and tie the ends together in an overhand knot.
  11. Take one length of Super-Lon Cord (this can be a scrap of the cord you trimmed off. Should be about 18 inches) and tie it around one end of the bare braided portion on the necklace. You need to wind the cord around the end of this portion to fatten up the end so the end cap can fit over this end. So wind the cord around the bare braided portion, about 1/4 of an inch. Tie one more overhand knot and trim the excess braid and tails.
  12. Using a toothpick or scrap of wire, add a dab of glue into the well of the end cap. Place the wrapped end of the kumihimo into the end cap. Set aside to dry. Move the other end of the braid and repeat this process on the other side.
  13. Be sure to let the glue dry before moving on. It is recommend to let the glue dry overnight before wearing the necklace.
  14. Once your braid has dried, open one jump ring and attach one end of the chain to the end cap. Close the jump ring. Move to the other end cap and repeat this process.
  15. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCZ-5410 - Preciosa Czech Crystal 4mm Bicone Beads 'Crystal Aurum' (50)
    Project uses 144 pieces. You will need 3 packages.

  • JSH-0240 - Toho Round Seed Beads 8/0 48F Opaque Frosted Navy Blue 8 Gram Tube
    Project uses 240 pieces. You will need 1 package.

  • JSH-0225 - Toho Round Seed Beads 8/0 41F Opaque Frosted White 8 Gram Tube
    Project uses 240 pieces. You will need 1 package.

  • XCR-4248 - BeadSmith Super-Lon Cord - Size 18 Twisted Nylon - White / 77 Yard Spool
    Project uses 1 piece. You will need 1 package.

  • FCR-1608 - Beadsmith Gold Plated Barrel Cord Ends With Ring 12mm Long - Fits Up To 6.5mm Cord (4)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
    Project uses 2 pieces. You will need 1 package.

  • CHA-4507 - 22K Gold Plated Medium Hammered Cable Chain 5.5mm Wide Bulk By The Foot
    Project uses 2 Feet. You will need 2 packages.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-6108 - No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 2 1/2 Inch (8 Pack)
  • XTL-6095 - Beadsmith Lightweight Kumihimo Round Disc Disk For Japanese Braiding and Cording 35mm Hole
  • XTL-6062 - Kumi Weight With Gator Clip For Kumihimo Braiding - 3.1 Ounces (1)
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Nautical
Ingredients JSH-0240, JSH-0225, XCR-4248, FCR-1608, FJR-5250, XTL-1054, PCC-1478, CHA-9978,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Toho Round Seed Beads 8/0 48F Opaque Frosted Navy Blue 8 Gram Tube
You will need 1 package(s).
1 package = 1 Tube.
$2.39 / Package | SKU: JSH-0240
Toho Round Seed Beads 8/0 #41F Opaque Frosted White 8 Gram Tube
You will need 1 package(s).
1 package = 1 Tube.
$2.39 / Package | SKU: JSH-0225
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - White / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$5.09 / Package | SKU: XCR-4248
The Beadsmith Cord Ends, Barrel with Ring 12mm, Fits 6.5mm Cord, Gold Plated (4 Pieces)
You will need 1 package(s).
1 package = 4 Pieces.
$3.47 / Package | SKU: FCR-1608
22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.87 / Package | SKU: FJR-5250
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
You will need 4 package(s).
1 package = .
/ Package | SKU: PCC-1478
Gold Plated Cable Chain, Circle Link 3mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$2.69 / Package | SKU: CHA-9978
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed