Retired - Woodland Bunny Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by cutting 13.5 inches of wire with your flush cutters. (I've already included 3 additional inches of wire needed for each side to allow for crimping).
2. String on a crimp tube through your wire, add the loop of your antiqued silver lobster clasp and bring 3" of your wire back through your crimp tube.
3. Pull the wire snug, and crimp your crimp tube. Snip off any excess wire from the short end.
4. Now you will begin to string on your beads, remembering to use a bead stopper when needed.
5. Begin sliding your beads onto your wire in the following order: 1 Black Diamond tear drop bead, 1 Olivine dagger bead, 1 Amethyst tear drop bead and another Olivine dagger bead. Repeat this sequence 16 more times, ending with a Black Diamond tear drop bead. Refer to photo for pattern assistance.
6. Once all your beads are on, slide on another crimp tube and an antiqued silver jump ring and bring the wire back through the crimp tube. Pull snug and crimp your crimp bead using your crimping pliers. Snip off any excess wire from the short end with your flush cutters.
7. Lastly, open up a jump ring with your pliers and slide it through the loop on your Green Girl Studios bunny charm. Before closing, slide the jump ring through the loop on your lobster clasp as well. Close with your pliers.
8. You're done!

• XCR-5593 - Soft Flex, Econoflex 7 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Steel Gray
  Project uses 13.5 inches. You will need 1 package.


• PND-9463 - Green Girl Studios Dangle Charm, 15mm Tiny Bunny, 1 Piece, Lead-Free Pewter
  Project uses 1 piece. You will need 1 package.


• BCP-0865 - Czech Pressed Glass 3 x 10mm Dagger Beads - Olivine (50)
  Project uses 34 pieces. You will need 1 package.


• BCP-0905 - Czech Glass Beads 9mm Teardrop Amethyst Purple (50)
  Project uses 17 pieces. You will need 1 package.


• BCP-0916 - Czech Glass Beads 9mm Teardrop Black Diamond AB (50)
  Project uses 18 pieces. You will need 1 package.


• FCR-1215 - Beadalon Silver Plated Crimp Tubes 2x1.8mm 1.3mm ID (75 Beads)
  Project uses 2 pieces. You will need 1 package.


• FCL-2540 - Antiqued Silver Plated Sleek Lobster Claw Clasps 15mm (6)
  Project uses 1 piece. You will need 1 package.


• FJR-5253 - Antiqued Silver Plated Open Jump Rings 5mm 20 Gauge (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose