Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will make a finished bracelet that is approximately 9" long. Measure your wrist and cut your wire shorter or longer to adjust the length. Be sure to include at least 6 additional inches of wire to allow for
crimping, three inches for each side.
- Cut 15 inches of wire with your flush cutters and string the tip through a crimp bead.
- String on your clasp then loop the beading wire back through the crimp bead (you want a short tail of about 3 inches of wire). Pull snug so that you have a small loop.
- Crimp the crimp bead and trim off the short tail.
- String your beads onto your wire starting with one green turquoise bead, one pale turquoise bead, one green olivine bead and one turquoise tear drop bead. Repeat this sequence 10 more times.
- Once you've strung all your beads, take the end of your wire and string it through another crimp bead. Add a jump ring and loop the wire back into the crimp bead.
- Using your crimp pliers, crimp your crimp bead. Snip off any excess beading wire.
- Your bracelet is now ready.
WHAT YOU'LL NEED: (scroll down for purchase options)
- XCR-69543 - Beadalon Wire Satin Gold 19 Strand .015 Inch / 30Ft
Project uses 15 inches. You will need 1 package.
- BCP-10067 - Czech Glass Beads Flat Pear Teardrops - 16x12mm 'Opaque Turquoise Picasso' (12)
Project uses 11 pieces. You will need 1 package.
- BCP-3467 - Czech Fire Polished Glass Beads 4mm Round 'Green Turquoise' (50
Project uses 11 pieces. You will need 1 package.
- BCP-10086 - Czech Fire Polished Glass Beads 4mm Round 'Opaque Pale Turquoise Star Dust' (50)
Project uses 11 pieces. You will need 1 package.
- BCP-3474 - Czech Fire Polished Glass Beads 4mm Round 'Green Olivine AB' (50)
Project uses 11 pieces. You will need 1 package.
- FCR-1200 - Beadalon Gold Plated Crimp Beads 1.3mm (85 Beads)
Project uses 2 pieces. You will need 1 package.
- FCL-1571 - 22K Gold Plated Spring Ring Clasps 7mm (25)
Project uses 1 piece. You will need 1 package.
- FJR-5171 - 22K Gold Plated Open Jump Rings 7mm 19 Gauge (20)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5265 - Mighty Crimping Pliers Large Crimpers For 3mm Crimps