Retired - Un Flambeau Earrings

PROJECT E151
Designer: Andrea Morici
Skill Level: Beginner
Like the warmth of a glowing lantern, these earrings are luminous with the fiery red of the Cubic Zirconia nestled inside it's filigree drop.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Don't forget to double all of the instructions to make both earrings. Begin by cutting two pieces of wire at about an inch and a half long each. Create a simple loop at the end of each piece of wire, turning it into an eyepin.
  2. Onto one eyepin thread a round filigree bead. Onto the other eyepin, thread the CZ tube bead. Create a simple loop on the other end of each eyepin, and trim off excess wire.
  3. Gently open the wire loop on either end of the round filigree bead, the way that you would open a jump ring.
  4. Thread one of the loops through the loop on the earring hook and close it once more.
  5. Thread the other loop through one of the wire loops at either end of the CZ tube bead and close it once more.
  6. Gently, with your fingers, slightly pry open two of the "petals" of the filigree bead drop, just enough so that you can slide the CZ teardrop bead into it.
  7. Once the CZ drop is placed within the filigree drop, close the petals once more.
  8. Insert a headpin through the hole at the top of the filigree drop, so that point of the headpin is facing away from the center of the drop.
  9. Using a pair of needle nose pliers, grab the edge of the filigree loop and bend it inward on a ninety degree angle, so that the headpin now points directly up from the tip of the filigree drop.
  10. Make a simple loop on the headpin and trim off excess wire.
  11. Open the headpin loop and thread it through the loop on the other side of the CZ tube bead. Close loop again.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-5742 - Antiqued Silver Plated Full Droplet Filigree Bead Wrap 8 x 27mm (2)
    Project uses 2 pieces. You will need 1 package.

  • BMB-5176 - Antiqued Silver Plated Filigree 8mm Round Beads (100)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5323 - Silver Plated Head Pins 1.5 Inches Long/21 Gauge (x50)
    Project uses 4 pieces. You will need 1 package.

  • WCR-2230 - Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, 8 Yard Spool, Tarnish Resistant Silver
    Project uses 8 inches. You will need 1 package.

  • FEA-2110 - Earring Hooks, French Wire with Coil 17x8mm, 10 Pieces, Sterling Silver
    Project uses 2 pieces. You will need 1 package.

Additional Information
Ingredients FHP-5323, WCR-2230, FEA-2110,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Head Pins, 1.5 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.49 / Package | SKU: FHP-5323
Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, Tarnish Resistant Silver (8 Yard Spool)
You will need 1 package(s).
1 package = 1 Spool.
$8.75 / Package | SKU: WCR-2230
Earring Hooks, French Wire with Coil 17x8mm Sterling Silver (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$8.17 / Package | SKU: FEA-2110
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed