Retired - Turquoise Stud Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by watching the video on How to Use Crystal Clay.
2. Following what you learned in the video, put on your gloves and mix a gum ball sized amount of white Crystal Clay.
3. Fill your square ring bezel with your mixed clay and gently place your Czech glass pyramid stud bead on top. Don't push your bead in too deep.
4. To make your pyramid bead have a snugger fit in your bezel ring, you will be using a head to line up on the sides of your ring. Simply measure and cut 4 lengths of 13mm long lengths of a gold plated head pin (using your flush cutters) and place into the Crystal Clay on the 4 sides of your ring. Press down. See photo for reference.
5. Let the ring dry over night and enjoy!

• FRG-1039 - Nunn Design Deep Bezel Ring, Square 12mm, 1 Ring, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• TRC-251 - Crystal Clay 2-Part Epoxy Clay Kit 'White' 25 Grams
  Project uses 1 piece. You will need 1 package.


• FHP-5219 - 22K Gold Plated Head Pins - 2 Inches Long/24 Gauge Wide (50 Pieces)
  Project uses 1 piece. You will need 1 package.


• BCP-11250 - Czech Glass Beads, 2-Hole Pyramid Studs 12mm, 2 Pieces, Turquoise Luster
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex