Click or scroll to zoom
Tap or pinch to zoom
Retired - Tough & Lovely Bracelet
Click or scroll to zoom
Tap or pinch to zoom
Retired - Tough & Lovely Bracelet
Retired - Tough & Lovely Bracelet

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Tough & Lovely Bracelet

PROJECT B130
Designer: Andrea Morici
Skill Level: Intermediate
Compliment piece to our Tough & Lovely Necklace. If you have purchased the materials necessary to create the necklace, you only need to buy the brass knot toggle bar (FCL-4655) to make the bracelet!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by cutting a piece of chain that is six inches long in length. Since this is a very heavy double-link chain we are using in this project, we recommend cutting it with memory wire cutters as opposed to using flush cutters or side cutters. Also, cut only one link at a time. If you have already made the Tough & Lovely necklace, simply use the remainder of the chain from that project.
  2. Open a 5mm jump ring and thread it though the small hole in the hammered brass ring charm. Close the jump ring again.
  3. Open two 7.25mm jump rings. Thread one through the double link at one end of the chain, and the other through the double link at the opposite end of the chain.
  4. To one of the jump rings add the brass knot toggle bar. Thread the other jump ring through the 5mm jump ring that is attached to the hammered brass ring charm. Close both jump rings once more.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9861 - Antiqued 22K Gold Plated Heavy Textured Double Round Link Cable Chain 11mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • PND-7109 - Vintaj Natural Brass Hammered Ring Open Circle Charms 22mm (2)
    Project uses 1 piece. You will need 1 package.

  • FJR-5347 - Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25)
    Project uses 1 piece. You will need 1 package.

  • FJR-5372 - Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20)
    Project uses 2 pieces. You will need 1 package.

  • FCL-4655 - Vintaj Natural Brass Love Knot Creative Bar Toggle 31mm (1)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Boho
Ingredients CHA-9861, FJR-5347, FJR-5372,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued 22K Gold Plated Textured Double Round Link Cable Chain, 11mm, by the Foot
Antiqued 22K Gold Plated Textured Double Round Link Cable Chain, 11mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$7.64 / Package | SKU: CHA-9861
Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25 Pieces)
Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$2.59 / Package | SKU: FJR-5347
Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20 Pieces)
Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$2.99 / Package | SKU: FJR-5372
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed