Retired - The Melrose Earrings

Name: Retired - The Melrose Earrings
Brand: Beadaholique
SKU: E701
Availability: OutOfStock

PROJECT E701

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Large and impressive gold swirls dominate these contemporary earrings. Accenting the swirls are radiant amethyst colored glass cabochons set into delicate bezel cups. These versatile earrings would be great for both a day at the office and a dinner date afterward.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Don't forget to double these instructions to make your matched pair of earrings!

Take one of your Nunn Design antique gold plated bezel cups, and using your chain nose pliers, carefully bend back one of the scallops 90 degrees.
Place a small dab of E6000 glue into the center of your bezel cup and then place one of your amethyst 13mm round glass cabochon into the glue. Let dry.
Open a 4mm jump ring and connect it to the loop at the base of the larger part of your Nunn Design gold plated swirl connector as well as the bent back loop of your bezel cup/cabochon. Close the jump ring.
Open the small loop at the base of your earring hook and connect it to the loop at the top of your spiral. Close the loop back up.
All done! Enjoy your new earring set.

WHAT YOU'LL NEED: (scroll down for purchase options)

SPCB-1301 - Glass Cabochons - 13mm Round - 'Amethyst' Foiled (4 Pieces)
Project uses 2 pieces. You will need 1 package.

FCO-3452 - Nunn Design Antiqued 24kt Gold Plated Pewter Swirl Connector 33mm (2)
Project uses 2 pieces. You will need 1 package.

FEA-3312 - Gold Plated Small Earring Hooks 16mm (20 Pairs)
Project uses 1 pair. You will need 1 package.

FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 2 pieces. You will need 1 package.

PND-6764 - Nunn Design Antiqued 24K Gold Plated Brass Round Bezel Cup Pendant 13mm (2)
Project uses 2 pieces. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Additional Information

Ingredients

FJR-5452, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.07
            
             / Package | SKU: FJR-5452

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054