Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Remember to double all of the instructions to make both earrings! Begin by threading onto a headpin a 3mm turquoise bead, a tapered tube, and another 3mm turquoise.
- Make a simple loop. Trim off and save excess wire.
- At one end of the excess piece of wire make a simple loop.
- Thread a 3mm turquoise bead onto the wire and make another simple loop.
- Connect the tapered tube dangle to one of the holes in the connector link.
- Connect one of the loops on the 3mm bead link to the other hole on the connector link.
- To the other loop on the 3mm bead link, add a jump ring.
- To that jump ring, add the leverback earring hook.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCO-5020 - Antiqued Silver Plated Hammered Ring Circle 2-Hole Link 19mm (2)
Project uses 2 pieces. You will need 1 package.
- FHP-5325 - Silver Plated Head Pins 2 Inches/21 Gauge (X50)
Project uses 2 pieces. You will need 1 package.
- FEA-6005 - Silver Plated Leverback Earrings -50 Earring Findings
Project uses 2 pieces. You will need 1 package.
- FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 2 pieces. You will need 1 package.