Retired - Sintra Earrings in Gold

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To make these earrings you will first want to watch the video: How to Finish Zola Elements Chain and Make a Bracelet. This video will show you how to cut the chain used in these earrings so that you expose the links which you can then attach a jump ring to.
2. From what you learned in the video, cut your Zola chain so that you have 5 intact bars with beads on them and then each end has exposed chain links.
3. Open a jump ring and attach it to the chain links on one end of your chain and also your earring hook. Close the jump ring.
4. On the other end of you chain, attach another jump ring. Close the jump ring. Open yet another jump ring and link it to the jump ring you just attached as well as the Nunn Design bezel charm. Make sure the charm is facing forward and then close the jump ring.
5. Apply a small amount of E6000 glue into the bezel and then set your Austrian crystal crystal down into the glue. Let dry for 24 hours before wearing.
6. Enjoy!

• CHA-1222 - Zola Elements Bulk Chain, Beaded Cable Links 6mm, By the Foot, Unfinished Brass/Turquoise
  Project uses 2 inches. You will need 1 package.


• SWCH-639572 - Austrian Crystal, 1088 Xirius Round Stone Chatons ss39, 6 Pieces, Crystal Light Coral
  Project uses 2 pieces. You will need 1 package.


• FJR-5450 - Antiqued Brass Open Jump Rings 4mm 22 Gauge (x100)
  Project uses 6 pieces. You will need 1 package.


• PND-904 - Nunn Design Open Back Bezel Charm, Circle Fits SS39 Xirius Stone, 1 Piece, Antiqued Gold
  Project uses 2 pieces. You will need 2 packages.


• FEA-106 - Nunn Design Earring Findings, Open Oval Hoop Ear Wire with Loop 15.5x44mm, 1 Pair, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
• XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose