Retired - Shadow Chandelier Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Remember to double all of the instructions to make both earrings. In this project, we used sterling silver findings which were oxidized using the liver of sulfur patina gel. If you choose to patina your findings, purchase the gel listed in the "what you'll need" section, follow the directions on the package, and complete the process before you assemble the earrings. You may also choose to leave the silver its original color.
2. Onto three headpins, thread a black 4mm glass druk. Onto two more headpins, thread a turquoise 4mm glass druk. Create a simple wire loop on each headpin, and trim off excess wire.
3. Sandwich a turquoise and a black stamping together. Open the loop on each of headpins, the same way you would open a jump ring.
4. Thread a black druk onto the center loop at the bottom of the stampings, and on each of the two outer loops. Thread turquoise druks onto the remaining two loops on the bottom of the stampings. Close all loops.
5. Open the earring hook, and thread it through the loop at the top of the stampings. Take the stamping off, flip it, and thread it back on if you'd like to switch colors!

• BCP-7467 - Czech Glass Druk 4mm Round Turquoise (100)
  Project uses 4 pieces. You will need 1 package.


• BCP-7490 - Czech Glass Druk Beads 4mm Round 'Jet Black' (100)
  Project uses 6 pieces. You will need 1 package.


• FHP-02310 - Head Pins, 1 Inch Long and 22 Gauge Thick, 20 Pieces, Sterling Silver
  Project uses 10 pieces. You will need 1 package.


• FEA-2084 - Sterling Silver Earring Hooks Kidney Wires 21 Gauge (10)
  Project uses 2 pieces. You will need 1 package.


• PND-00061 - Black Color Coated Brass Filigree Stamping By Ezel - Etruscan Chandelier Finding 43mm (1)
  Project uses 2 pieces. You will need 2 packages.


• PND-00069 -
  Project uses 2 pieces. You will need 2 packages.


• XTL-8006 -
  Project uses 1 piece. You will need 1 package.