Retired - Sea Maiden Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. With a sharp pair of scissors, carefully cut the image out of the collage sheet.
2. Paint a thin layer of Nunn Glue on the image using a soft paint brush.
3. Center the image on the flat side of the glass cabochon and press it down, taking care to smooth out any bubbles. Set aside to dry.
4. Once it has dried, paint another thin layer of Nunn Glue on the back of the image. Allow to dry.
5. Dab a small amount of E6000 on the back of the cabochon and center it on the flat part of the ring. Allow a full twenty-four hours to dry.

• FRG-0721 - Antiqued Silver Plated Radiating Diamond Glue-On 15mm Round Signet Ring Adjustable (1)
  Project uses 1 piece. You will need 1 package.


• BGL-9001 - Clear Czech Glass Round Cabochons Magnify 14.5-15mm /4 Beads
  Project uses 1 piece. You will need 1 package.


• XTL-9503 - Nunn Design Collage Sheet Bathing Beauties For Scrapbook - Fits Patera
  Project uses 1 piece. You will need 1 package.


• XTL-1031 - Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
  Project uses 1 piece. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.