Click or scroll to zoom
Tap or pinch to zoom
Sand and Sea Earrings
Sand and Sea Earrings

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Sand and Sea Earrings

Store Closing, Limited Stock
PROJECT E3080
Designer: Karlin Jones
Skill Level: Beginner
Pairing the classic nautical colors of Cobalt blue and gold in a striking design, these bold earrings mimic the essence of sand and sea.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Using your chain nose pliers, open a gold plated jump ring gold plated and slide on the bottom loop from your pewter stud post earring and also the loop from your cobalt blue sea glass triangle and close.
  2. Add on your ear nut and you're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FJR-07021 - Jump Rings, Open 8mm Diameter 20 Gauge, 100 Pieces, Gold Plated
    Project uses 2 pieces. You will need 1 package.

  • BGL-9907 - Cultured Sea Glass, Triangle Shield Pendants 37x15mm, 2 Pieces, Cobalt Blue
    Project uses 2 pieces. You will need 1 package.

  • FEA-1547 - Earring Posts, Stud Beaded Round 11mm, 1 Pair, 22K Gold Plated Pewter, by TierraCast
    Project uses 1 pair. You will need 1 package.

  • FEA-01120 - Earring Backs, Medium Clutch 5mm, 3 Pairs, 14K Gold Filled
    Project uses 1 pair. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-5511 - The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Summer, Boho
Ingredients FJR-07021, BGL-9907, FEA-1547, FEA-01120,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Jump Rings, Open 8mm Diameter 20 Gauge, Gold Plated (100 Pieces)
Jump Rings, Open 8mm Diameter 20 Gauge, Gold Plated (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$3.11 / Package | SKU: FJR-07021
You will need 1 package(s).
1 package = .
/ Package | SKU: BGL-9907
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-1547
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-01120
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
$11.08 / Package | SKU: XTL-5200
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$5.49 / Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed