Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
The necklace instructions create a long 36 inch necklace. You can easily make it shorter if you want by just cutting the chain to a shorter length.
- Cut your chain in half and set aside.
- Thread an eye pin through one side of your open frame pendant. Place onto the eye pin 4 micro spacer beads as well as 3 paddles with the longest one in the center. The large loops of the paddles will slide over the micro spacers.
- Next thread the wire end of the eye pin through the hole on the other side of your open frame pendant, thus suspending the beads and the paddles in the center. Create a simple wire loop right where the wire exits the outside of the open frame pendant. Trim off excess wire.
- Open the simple wire loop you just made (the same way you would open a jump ring) and link an end chain link to it. Close the loop. Repeat this process with the eye of the eye pin on the other side of your pendant and with the other length of cut chain.
- To finish your necklace, attach a 4mm jump ring to the last chain link of both your chains. Onto one of those 4mm jump rings link on the lobster clasp and onto the other one, link on the 5mm closed jump ring.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-147 - Nunn Design Open Frame Pendant, Horseshoe 20x49mm, 1 Piece, Antiqued Gold
Project uses 1 piece. You will need 1 package.
- PND-137 - Nunn Design Pendant, Short Paddle 5x33mm, 1 Piece, Bright Silver
Project uses 2 pieces. You will need 2 packages.
- PND-133 - Nunn Design Pendant, Long Paddle 4.3x45mm, 1 Piece, Bright Silver
Project uses 1 piece. You will need 1 package.
- FCL-7523 - Nunn Design Silver Plated Lobster Clasps 12mm (2)
Project uses 1 piece. You will need 1 package.
- FJR-4005 - Silver Plated Closed Jump Rings 5mm 20 Gauge (50)
Project uses 1 piece. You will need 1 package.
- FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
Project uses 3 pieces. You will need 1 package.
- CHA-9812 - Nunn Design Silver Plated Oval Cable Chain, 2.3mm, by the Foot
Project uses 3 feet. You will need 3 packages.
- FHP-6261 - Silver Plated Open Eye Pins 21 Gauge 2 Inch (x50)
Project uses 1 piece. You will need 1 package.
- BCP-01134 - True2 Czech Fire Polished Glass, Faceted Micro Spacer Beads 2x3mm, 100 Pieces, Nickel Plated
Project uses 4 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-3311 - BeadSmith Casual Comfort, Round Nose Pliers with PVC Handle, 1 Piece
- XTL-3310 - BeadSmith Casual Comfort, Chain Nose Pliers with PVC Handle, 1 Piece