Retired - Nico Ring in Onyx

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by putting on your gloves (optional) and place your Nunn Design Ring onto a paper towel. Add a few drops of Vintaj patina ink onto your paper towel or other surface you don't mind using.
2. Next, take your brush, dip it in your patina ink and carefully dab your ring all around. Continue until your ring is covered in uniform dabs of patina. See photo.
3. While the patina is still wet, use the side of your Vintaj relief block to buff the ring surface and remove some of the patina.
4. Set aside to dry. Once completely dry, apply a coat of sealant with a brush onto the surface of your ring to seal in the patina. Let dry overnight.
5. You're done!

• FRG-0727 - Nunn Design Ring, Hammered Ring Size 8, 1 Piece, Antiqued Silver
  Project uses 1 piece. You will need 1 package.


• XTL-9078 - Vintaj Patina Opaque Permanent Ink - Black Onyx - 0.5 Ounce Bottle
  Project uses 1 piece. You will need 1 package.


• XTL-1032 - Nunn Design Sealant Protectant 2 oz. - For Patera Findings (1)
  Project uses 1 piece. You will need 1 package.

• XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding