Retired - Miami Beach Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Watch the instructional video: How to Use Crystal Clay.
2. Prepare a piece of white crystal clay and smooth it into the silver tone bezel ring base.
3. Press the textured iridescent glass button into the center of the bezel until the button shank rests against the bottom of the bezel.
4. Smooth the clay around the edges of the button, removing any excess.
5. Cut a piece of light rose silver plated rhinestone chain long enough to fit in the space around the button (about 21 links) and press it into place. Press it down until the rhinestones sit (slightly angled) at the same level as the button. See photos for reference.
6. Allow the clay to fully cure before wearing.

• PND-0126 - Czech Glass, Round Textured Button 22.5mm, 1 Piece, Iridescent
  Project uses 1 piece. You will need 1 package.


• FRG-0762 - Silver Tone Brass 30mm Round Bezel Adjustable Ring (1)
  Project uses 1 piece. You will need 1 package.


• CHA-10115 - Czech Crystal Silver Plated Rhinestone Cup Chain 24PP Light Rose (By The Foot)
  Project uses 4 inches. You will need 1 package.


• TRC-251 - Crystal Clay 2-Part Epoxy Clay Kit 'White' 25 Grams
  Project uses 1 package. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex