Retired - Matte Metallic Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before you begin, please watch the videos on How To Use Crystal Clay and How to Make a Seed Bead and Crystal Clay Bangle by Nunn Design. You will be doing a similar technique.
2. Following what you learned in the video, put on your gloves and make a gumball sized amount of mixed black clay. Gently press into the channel of your bangle, without getting any clay on the outer edges.
3. Begin embedding your CzechMates 2-hole bar beads in Matte Metallic Leather and Matte Metallic Flax in a vertical rotating pattern. Make sure to embed about half of each bead into the clay. See photo.
4. Set it aside to cure over night. You're done!

• JB-2508 - Solid Brass Bangle, Round Channel Bracelet 7.9mm (5/16 Inch) Wide, 1 Piece
  Project uses 1 piece. You will need 1 package.


• BCP-33428 - CzechMates Glass, 2-Hole Bar Beads 6x2mm, 10 Grams, Matte Metallic Leather
  Project uses 62 pieces. You will need 1 package.


• BCP-33429 - CzechMates Glass, 2-Hole Bar Beads 6x2mm, 10 Grams, Matte Metallic Flax
  Project uses 64 pieces. You will need 1 package.


• TRC-230 - Crystal Clay 2-Part Epoxy Clay Kit 'Black' 25 Grams
  Project uses 1 piece. You will need 1 package.