Retired - Love Letter Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. This entire project can be seen in the video: How to Make a Domino Tile Pendant Using Epoxy Stickers.
2. If you would rather not view the video, here are the written instructions:
3. Begin by cutting out 1 epoxy sticker, keeping the back and front protective sheets on and leaving a slight border around the edge. If you want, you can peel the front protective sheet off at this time. Place the sticker (with back still attached) onto your collage sheet and view the images through the sticker so that you can get a good idea of how it will look. Once you have decided upon an image (we chose the bird with the letter), then carefully pull the protective backing off and place the sticker over the image. Press into place.
4. Using your scissors, carefully cut around the sticker. Do not cut the sticker itself.
5. Onto the backside of the image (with the sticker on the other side), spread a layer of Nunn Glue. Make sure to cover the entire backside. Turn over and press into place on the backside of the domino. Hold down firmly for 2 minutes and then let dry fully for another 15 minutes.
6. Take your Aanraku bail and onto the flat glue-on section of the bail, spread some E6000 glue. Turn over and press into place on your domino tile (the side with the dots and without the sticker). Make sure that the bail is centered. Let dry fully.
7. When your bail is dry, open your pre-made ball chain necklace and thread the ball chain through the hoop at the top of the Aanraku bail. Close your necklace back up.
8. Enjoy!

• AXC-91804 - Pink Color Steel 2mm Ball Chain Necklace 17.5 Inches
  Project uses 1 piece. You will need 1 package.


• FCO-4220 - Aanraku, Glue-On Pendant Bails, Small, 10 Pieces, Silver Plated
  Project uses 1 piece. You will need 1 package.


• PND-2060 - Plastic Mini Domino Jewelry Pendant Tiles Rectangle 27.5x13.5mm (14)
  Project uses 1 piece. You will need 1 package.


• XTL-1031 - Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
  Project uses 1 piece. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.


• XTL-9501 - Nunn Design Collage Sheet Butterflies & Birds For Scrapbook - Fits Patera
  Project uses 1 piece. You will need 1 package.


• XTL-9582 - Rectangle Epoxy Stickers 27x13mm - For Mini Dominos / Collage Pendants (14)
  Project uses 1 piece. You will need 1 package.

• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp