Retired - Knotty Neons Bracelet in Bright Neon

Retired - Knotty Neons Bracelet in Bright Neon

Name: Retired - Knotty Neons Bracelet in Bright Neon
Brand: Beadaholique
SKU: B1104
Availability: OutOfStock

PROJECT B1104

Designer: Megan Milliken

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

Delicate macrame knotting highlights the assortment of bright neon colors in this bracelet.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

You will also need some transparent tape for this project.

Before you begin, watch the video: How to Make a Knotting Cord Macrame Bracelet. This video will walk you through the entire process of making this bracelet.
Cut two 3' lengths of each color of knotting cord. Arrange them as shown in the video and make a knot near the top.
Following the instructions in the video, knot your cords in the pattern demonstrated.
Continue until your knotting has reached the desired length. The clasp will add just under 3/4" to your finished length, so be sure to subtract that from your desired length when calculating how long to make your macrame. I made my knotting about 6" long.
Use transparent tape, ribbon crimps, and E6000 glue to finish the ends of your knotting as shown in the video.
Use a jump ring to attach one ribbon crimp to one side of a magnetic clasp. Repeat with the other side to finish attaching your clasp.
Allow the glue to dry thoroughly before wearing or opening your bracelet.

WHAT YOU'LL NEED: (scroll down for purchase options)

XCR-0360 - Chinese Knotting Cord Assortment 0.8mm Thick - Bright Neon Mix (4 Pack)
Project uses 24 feet. You will need 1 package.

FCR-1421 - 22K Gold Plated Ribbon Pinch Crimps Cord Ends 10mm or 3/8 IN. (20)
Project uses 2 pieces. You will need 1 package.

FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 2 pieces. You will need 1 package.

FCL-6807 - 22K Gold Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-6116 - BeadSmith Large Macrame Board For Braiding 14x10 Inches

Additional Information

Ingredients

FCR-1421, FJR-5452, FCL-6807, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Cord Ends, Ribbon Pinch Crimp 10x5.5mm, Gold Plated (20 Pieces)

            Cord Ends, Ribbon Pinch Crimp 10x5.5mm, Gold Plated (20 Pieces)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $4.99
            
             / Package | SKU: FCR-1421

Sold out

22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.07
            
             / Package | SKU: FJR-5452

Magnetic Clasps, Round 6x4.5mm, 22K Gold Plated (1 Set)

            Magnetic Clasps, Round 6x4.5mm, 22K Gold Plated (1 Set)
        
You will need 1 package(s).
1 package = 1 Set.

                $1.29
            
             / Package | SKU: FCL-6807

Sold out

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054