Retired - Jackie Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut two lengths of chain each 6.5" long.
2. Place an eye pin through one hole of a pyramid bead. Create a simple loop on the other end of the bead. Repeat with a second eye pin in the second bead hole. Repeat this process with two more pyramid beads.
3. Place a black bugle bead onto an eye pin and create a simple loop. Repeat with 11 more bugle beads and eye pins.
4. Find the center link of a piece of chain. Attach the loops on one side of a pyramid bead to the links to either side of the center. Repeat to attach the other length of chain to the other side of the bead.
5. Skip three links to the right from where the pyramid bead is attached and attach a bugle bead to both sides of chain with the eye pin loops. Skip one link and attach another bugle bead. Skip on link and attach a third bugle bead.
6. Skip three links to the right and attach another pyramid bead. Then skip three more links and attach another series of three bugle beads as before.
7. Now finish the left half of the beads as you did for the right.
8. Take a jump ring and place the last two links on the right side of the chain into the jump ring. Before you close the ring, add on one half of a magnetic clasp. Close the ring.
9. Complete the other side of the bracelet in the same way.

• BCP-11213 - Czech Glass Beads, 2-Hole Pyramid Studs 12mm, 2 Pieces, Dark Neon Acai Blue
  Project uses 3 pieces. You will need 2 packages.


• JSB-2032 - Toho Bugle Tube Beads Size 3 2x9mm Opaque Jet 10 Grams
  Project uses 12 pieces. You will need 1 package.


• FHP-6266 - Silver Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
  Project uses 18 pieces. You will need 1 package.


• CHA-9970 - Bright Silver Plated Round Rolo Chain 3mm Bulk By The Foot
  Project uses 13 inches. You will need 2 packages.


• FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
  Project uses 2 pieces. You will need 1 package.


• FCL-6808 - Silver Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex