Retired - Irish Pride Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place a crystal bead onto a head pin. Create a simple wire loop after the bead and cut off excess wire with your cutters. Repeat this step three more times to create a total of 4 dangles. When you place these on the wire bangle, you will open and close their simple loops just like jump rings.
2. Place one green, one crystal, and one orange crystal bead onto a head pin. Create a simple wire loop after the bead and cut off excess wire with your cutters.
3. Open a jump ring and place it onto one of the charms. Link this jump ring (with charm) to the bottom bar of the adjustable mid section on your bangle. Close the jump ring.
4. Onto the outer ring of the bangle, attach the headpin with the green, crystal and orange beads on it by opening and closing the simple wire loop same as you would a jump ring.
5. Next you will add the single crystals dangles you made in step one to the bottom bar of the adjustable mid section on your bangle. Place them in-between each charm.

• PND-8094 - Silver Plated With Green Enamel - St. Patrick's Day Irish Green Beer 15mm (1)
  Project uses 1 piece. You will need 1 package.


• PND-8095 - Silver Plated Charm Enamel Shamrock Clover Charm With Irish Flag (1)
  Project uses 1 piece. You will need 1 package.


• PND-10478 - Silver Plated and Enameled Charm, Bearded Leprechaun 18.8x11.5x3.4mm, 1 Piece, Green
  Project uses 1 piece. You will need 1 package.


• SWBB-1600 - Austrian Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Crystal
  Project uses 5 pieces. You will need 1 package.


• SWC-1665 - Austrian Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Sun
  Project uses 1 piece. You will need 1 package.


• SWBB-1650 - Austrian Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Emerald
  Project uses 1 piece. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 3 pieces. You will need 1 package.


• FHP-5323 - Silver Plated Head Pins 1.5 Inches Long/21 Gauge (x50)
  Project uses 5 pieces. You will need 1 package.


• JB-2810 - Expandable Charm Bangle Bracelet, Double Bar, 1 Bracelet, Bright Silver
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex