Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You can also make these earrings in gold and with your favorite color of PRESTIGE crystal 10mm Cushion fancy stones.
- Begin by placing a small dab of E6000 glue into your Cushion stone bezel settings. Then set your fancy stones into the glue and let fully dry. Do this for all your components for both earrings. Once dry, proceed onto the next step.
- Place 1 Olive bead onto an eye pin and then create a simple wire loop immediately after it. Trim excess wire.
- Open the simple wire loop you made in the previous step and connect it onto the bezel pendant. Close the loop. You can open and close simple wire loops just like jump rings.
- On the other side of the Olive bead link, open that loop and connect it to one of the loops on one side of your bezel link. Close the loop. Make sure that your stones are all facing forward.
- Finally, open the loop at the base of your earring hook and connect it to the top loop of your bezel link. Close the loop back up.
- Repeat steps 2 - 5 to make your matched earring.
- Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- 5K63-266R - Earring Findings, Hypo-Allergenic Niobium French Hooks with Loop - Ball - Black Oxide Heishe 23mm / 20 Gauge, Silver, by TierraCast (2 Pairs)
Project uses 1 pair. You will need 1 package(s).
- PRES-5044-JET7 - PRESTIGE Crystal, #5044 Olive Bead 7x6mm, Jet (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-4470-CDGI10 - PRESTIGE Crystal, #4470 Cushion Fancy Stone 10mm, Crystal Dark Grey Ignite
Project uses 4 piece(s). You will need 4 package(s).
- FCO-046 - TierraCast Hammertone Bezel Link, Rhodium Plated, Fits Cushion Square 10mm (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PNT-122 - TierraCast Hammertone Bezel Pendant, Rhodium Plated, Fits Cushion Stone 10mm (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- FHP-6260 - Open Eye Pins, 1.5 Inches Long and 21 Gauge Thick Silver Plated (50 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece(s). You will need 1 package(s).
RECOMMENDED TOOLS:
- XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers