Click or scroll to zoom
Tap or pinch to zoom
Retired - High Voltage Earrings
Retired - High Voltage Earrings

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - High Voltage Earrings

PROJECT E3010
Designer: Karlin Jones
Skill Level: Beginner
These earrings have just the right amount of edge! With a striking antiqued silver plated lightning bolt pendant stamping hanging off of a feminine bow, it's the perfect combination of sweet and sassy.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Begin by opening up the loop in your earring hook (like you would a jump ring) and slide it onto the top hole of your bow connector stamping. Close the loop back up.
  2. Next open up a jump ring using your chain nose pliers and slide it onto the bottom hole of your bow connector stamping. Do not close your jump ring yet.
  3. Take your lightning bolt pendant and also slide it through the same jump ring. Close the jump ring using your pliers.
  4. Your earring is now ready!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-10027 - Antiqued Silver Plated Large Lightning Bolt Pendant Stamping 62 x 17.5mm (2)
    Project uses 2 pieces. You will need 1 package.

  • FCO-9809 - Antiqued Silver Plated Bow Connector Stamping 15x8.5mm (4)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 2 pieces. You will need 1 package.

  • FEA-3015 - Silver Plated Fishhooks Earring Hooks (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients FJR-5150, FEA-3015,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.39 / Package | SKU: FJR-5150
Earring Hooks, Fishhook Style 15MMx17MM, Silver Plated (25 Pairs)
Earring Hooks, Fishhook Style 15MMx17MM, Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 50 Pieces.
$4.94 / Package | SKU: FEA-3015
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.49 / Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed