Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Start this necklace by cutting the following lengths of chain: 2 lengths of gold chain that are 5" long each and 2 lengths of silver chain that are 3.5" long each.
- Once your chain has been cut, the rest of the project construction is simply linking elements together with jump rings.
- Open a gold jump ring and connect it to your clasp and the end chain link of a gold piece of chain. Close the jump ring.
- Connect a gold jump ring to the other end chain link of that same piece of chain as well the end chain link of a piece of silver chain.
- Connect a silver jump ring to the other end chain link of the silver chain as well one of the honeycombs on your honeycomb pendant (your honeycomb pendant should sit horizontally). On the other end of the honeycomb pendant, attach a silver jump ring and connect it to the end honeycomb of a second honeycomb pendant. Please refer to picture if needed for orientation.
- You area now at the half way point of your necklace. Repeat the previous 3 steps to create the rest of your design, creating a mirror image of the first half. The only exception will be at the very end to add a silver jump ring instead of the lobster clasp.
- FJR-5459 - Silver Plated Open Jump Rings 5mm 21 Gauge (50)
Project uses 5 pieces. You will need 1 package.
- FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 4 pieces. You will need 1 package.
- FCO-04101 - Blank Flat Stamping Connector, Open Honeycomb Design 27x20mm, 1 Piece, Gold Plated
Project uses 3 pieces. You will need 3 packages.
- CHA-99958 - 22K Gold Plated Slim Rolo Chain 2mm Bulk By The Foot
Project uses 10 inches. You will need 1 package.
- CHA-0500 - Silver Plated Bulk Chain, Round Rolo 2mm, Sold By The Foot
Project uses 7 inches. You will need 1 package.
- FCL-2529 - 22K Gold Plated Sleek Lobster Claw Clasps 9mm (10)
Project uses 1 piece. You will need 1 package.
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
|Ingredients||FJR-5459, FJR-5452, FCO-04101, CHA-99958, CHA-0500, FCL-2529,|