Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Don't forget to double all of the instructions to make both earrings! Onto a headpin thread a daisy spacer, a small wooden cog, a medium-sized silver cog, and a large brass cog. Thread this headpin through the smallest hole in the brass filigree stamping close to the pointed side (the third hole down from the pointed tip).
- Thread another daisy spacer onto the headpin and trim the headpin to roughly half an inch long. Using a pair of round nose pliers, curl the headpin into a tight spiral until it touches the back of the stamping, and everything fits snugly.
- Open one of the larger jump rings and thread it through the edge of the large brass cog, and through the hole in the point of the filigree. Close the jump ring.
- Open a small brass jump ring and thread it through both the larger jump ring and the loop on the earring hook. Close the jump ring once more.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BWD-7363 -
Project uses 2 pieces. You will need 2 packages.
- PND-7023 - Vintaj Natural Brass Delicate Crest Filigree Stamping 28x33mm (1)
Project uses 2 pieces. You will need 2 packages.
- PND-5866 - Antiqued Brass Stamping Steampunk Star Gear Cog Wheel 26mm (2)
Project uses 2 pieces. You will need 1 package.
- PND-5853 - Antiqued Silver Plated Stamping Steampunk Star Gear Cog Wheel Small 16mm (2)
Project uses 2 pieces. You will need 2 packages.
- FJR-5372 - Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20)
Project uses 2 pieces. You will need 1 package.
- FJR-5340 - Vintaj Natural Brass Jump Rings 4mm Open 21 Gauge (25)
Project uses 2 pieces. You will need 1 package.
- FEA-6020 - Antiqued Brass Leverback Earrings - 10 Earring Findings
Project uses 2 pieces. You will need 1 package.
- FHP-5522 - Vintaj Natural Brass Head Pins 21 Gauge 2 Inch (20)
Project uses 2 pieces. You will need 1 package.
- BMB-3239 - TierraCast Rhodium Plated Pewter Daisy Spacer Beads 3mm (x 50)
Project uses 4 pieces. You will need 1 package.