Retired - For My Mother Bracelet

PROJECT B140
Designer: Andrea Morici
Skill Level: Beginner
October is the official month for the promotion of breast cancer awareness. However, if you create a piece of jewelry to honor someone you love who has been affected, every day can be a reminder to all that a cure must be found. I made this piece for my favorite survivor, my Mother.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. To begin, cut a piece of Soft Flex beading wire at about one foot long, using your Flush Cutters (XTL-5600). Secure one end of the wire with a Bead Stopper (XTL-3000).
  2. Onto the Soft Flex thread the following, an Austrian crystal bicone, a sterling silver inspirational bead (you may choose the order you would like the inspirational beads to go in), an Austrian crystal bicone, a bead cap, a 12mm round pink quartz bead, and a bead cap.
  3. Repeat this stringing pattern four more times, then add an Austrian crystal bicone, the last sterling silver inspirational bead, and another Austrian crystal bicone.
  4. Thread a crimp tube onto the end of the strand, but do not crimp it yet. Thread the end of the strand through a closed jump ring, back through the crimp tube, pull snug, and crimp the tube. Trim off excess wire.
  5. Remove the Bead Stopper from the opposite end of the strand and repeat the previous step.
  6. Open two sterling silver open jump rings. Use one to attach the round part of the toggle clasp to one end of the bracelet, and use the other jump ring to attach the bar part of the toggle clasp to the other end of the bracelet. Close both jump rings again.
  7. Open the jump ring on the "Mother" charm. Thread it onto the round part of the toggle clasp and close it once more.
  8. Place a crimp bead cover over both of the crimp tubes, and gently squeeze both of them shut.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-5123 - Soft Flex, 49 Strand Heavy Beading Wire .024 Inch Thick, 30 Feet, Satin Silver
    Project uses 1 foot. You will need 1 package.

  • SPQR-22 - Rose Quartz Gems Round Beads 12mm - 15.5 In. Strand
    Project uses 5 pieces. You will need 1 package.

  • FJR-03186 - Sterling Silver Open Jump Rings 6mm 17 Gauge Heavy (4)
    Project uses 2 pieces. You will need 1 package.

  • FJR-03065 - Sterling Silver Closed Jump Rings 6mm 20 Gauge (10)
    Project uses 2 pieces. You will need 1 package.

  • PND-1331 - Sterling Silver Message Charm, 'Mother' 11x8mm, 1 Piece, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BMB-1630 - Sterling Silver Message Bead, 'Faith' 11x8mm, 1 Piece, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BMB-1631 - Sterling Silver Message Bead, 'Hope' 11x8mm, 1 Piece, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BMB-1637 - Sterling Silver Message Bead Charm, 'Believe' 11x8mm, 1 Piece, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BMB-1638 - Sterling Silver Message Bead, 'Survivor'/Ribbon 11x8mm, 1 Piece, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • BMB-1645 -
    Project uses 1 piece. You will need 1 package.

  • BMB-1648 -
    Project uses 1 piece. You will need 1 package.

  • FCR-01122 - Sterling Silver Crimp Beads 2 x 2mm (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-01042 - Sterling Silver Crimp Bead Covers 4mm (10)
    Project uses 2 pieces. You will need 1 package.

Additional Information
Theme Mother's Day, Awareness
Ingredients XCR-5123, FJR-03065, FCR-01042, FCR-01122,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Soft Flex, 49 Strand Heavy Beading Wire .024 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$16.69 / Package | SKU: XCR-5123
Sterling Silver Closed Jump Rings 6mm 20 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$5.39 / Package | SKU: FJR-03065
Crimp Bead Covers, 4mm, Sterling Silver (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$7.97 / Package | SKU: FCR-01042
Crimp Beads, 2x2mm, Sterling Silver (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$5.49 / Package | SKU: FCR-01122
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed