Retired - Fit for a Queen Adjustable Bangle

PROJECT B3060
Designer: Karlin Jones
Skill Level: Beginner
Make this trendy bangle bracelet featuring a sparkly Crystal Austrian crystal fancy stone and a bright silver Nunn Design Crown charm. This is an effortlessly classic accessory.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by placing a dab of E6000 glue onto the center of your silver tone bezel setting. Carefully place your Crystal Austrian crystal fancy stone down onto the glue, faceted side up. Set aside to dry.
  2. Using your chain nose pliers, open a jump ring silver plated jump ring and slide on the loop from your Nunn Design crown charm. Also slide on the bent wire loop that is on the left side of your adjustable wire bangle. See photo for placement assistance.
  3. Next, open up another jump ring and slide on the loop from your rivoli bezel setting. Also slide you jump ring onto the bottom bar that is in the front of your bangle and close.
  4. That�s it!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2578 -
    Project uses 1 piece. You will need 1 package.

  • PND-05178 - Nunn Design Charm, 20x24.5mm Crown In Circle Bezel, 1 Piece, Bright Silver
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • FCO-4406 - Silver Tone Pendant Setting For Austrian crystal 12mm Rivoli (1)
    Project uses 1 piece. You will need 1 package.

  • SWC-9300 - Austrian Crystal, 1122 Rivoli Fancy Stones 12mm, 4 Pieces, Crystal SF
    Project uses 1 piece. You will need 1 package.

  • FJR-5180 - Silver Plated Open Jump Rings 8mm - 18 Gauge (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients XTL-1054, FJR-5180,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$68.69 / Package | SKU: XTL-1054
Silver Plated Open Jump Rings 8mm - 18 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$7.89 / Package | SKU: FJR-5180
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed