Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Create this design in your favorite green or crystal color of PRESTIGE crystal Margarita beads!
- To make this earring, place onto an eye pin these beads in the following order: 4mm cube bead, 12mm Margarita bead, 10mm Margarita bead, 8mm Margarita bead, 6mm Margarita bead, and finally the 3mm bicone.
- After the last bead, create a simple wire loop and trim off excess wire.
- Open the loop at the base of the earring hook and slip on the loop you made on top of your beads. Close the loop back up.
- Open the loop at the base of your tree and slip onto it a star charm. Close the loop.
- Make your second earring. Happy holidays! Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- FEA-304 - Earring Findings, Balloon Ear Wire 18x26mm, 14k Gold-Filled (1 Pair)
Project uses 1 pair. You will need 1 package(s).
- FHP-6258 - Open Eye Pins, 2 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- PRES-5601-TO4 - PRESTIGE Crystal, #5601 Faceted Cube Bead 4mm, Topaz (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-5328-SIALT3 - PRESTIGE Crystal, #5328 Bicone Bead 3mm, Light Siam (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-3700-CVM6 - PRESTIGE Crystal, #3700 Margarita Flower Bead 6mm, Crystal Vitrail Medium (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-3700-CVM8 - PRESTIGE Crystal, #3700 Margarita Flower Bead 8mm, Crystal Vitrail Medium (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-3700-CVM10 - PRESTIGE Crystal, #3700 Margarita Flower Bead 10mm, Crystal Vitrail Medium (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-3700-CVM12 - PRESTIGE Crystal, #3700 Margarita Flower Bead 12mm, Crystal Vitrail Medium (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PND4674 - Gold Filled Charm, Cutout Star 8mm, 1 Piece
Project uses 2 piece(s). You will need 2 package(s).
RECOMMENDED TOOLS:
- XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)