Retired - Felicia Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. The inner channel of this bangle measures 8mm and the leather strip measures 10mm so you will need to take the leather cutting tool and trim off 2mm from the width of the leather strip. Tip: work in small increments to trim the leather so you don't trim too much at once.
2. Once you have your strip that is 8mm wide and 10 inches long, take the hypo cement and place the glue onto a one inch section of the channel of the bangle. Lay the faux leather strip into the channel. Work in small sections giving the glue a few minutes to dry before adding more and moving on to the next section.
3. As you come to the end, you will have excess faux leather, simply trim the end to match up and finish gluing the seam of the bangle.
4. Be sure to let it dry fully before wearing.
5. All done!

• JB-2661 - Nunn Design Antiqued 24kt Gold Plated Round Channel Bangle Bracelet - 2 3/4 Inch
  Project uses 1 piece. You will need 1 package.


• XCR-1323 - Create Recklessly, Symphony Faux Leather Strip, for Bracelets 10mm Wide, 1 Yard, Marshmallow White
  Project uses 10 Inches. You will need 1 package.


• XTL-1001 - G S Hypo Cement Precise Applicator Essential!
  Project uses 1 piece. You will need 1 package.

• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
• XTL-0811 - Create Recklessly, Rotary Cutter for Leather Fabric & Paper 45mm
• XTL-0812 - Create Recklessly, Poly Punching Cutting & Tooling Board with Ruler