The braided cork in this project measures 7�. To adjust the size, simply change the braided cork length in your materials list.
- Begin by adding a few drops of Super New glue into one of your gold plated cord ends.
- Carefully place one end of your pre-cut 7" length of Regaliz braided cork into the cord end. (This glue is quite strong so be careful not to get any on your fingers.) Hold in place for a few seconds.
- Repeat this process with a second cord end and the other end of your Regaliz braided cork. Set aside.
- Slide on a carnelian gemstone bead onto a gold plated eye pin. Create a simple wire loop with your round nose pliers and snip off any excess wire using your flush cutters.
- Next, with your chain nose pliers open a gold plated jump ring and slide it onto a simple wire loop from one side of your carnelian gemstone bead. Before closing the jump ring, also slide on the loop from on of your cord ends and close.
- Repeat this process with a second jump ring and your second cord end.
- That�s it!
WHAT YOU'LL NEED: (scroll down for purchase options)
- CHX-1183 - Regaliz Portuguese Cork Cord, Round and Braided 6mm, By The Inch, Dark Brown
Project uses 7 inches. You will need 7 packages.
- SPCA-59 - Orange carnelian Gemstone Faceted Nugget Beads 15-25mm (4 Beads)
Project uses 1 piece. You will need 1 package.
- FJR-5166 - 22K Gold Plated Open Jump Rings 6mm 18 Gauge (50)
Project uses 2 pieces. You will need 1 package.
- XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
Project uses 1 piece. You will need 1 package.
- FCR-1608 - Beadsmith Gold Plated Barrel Cord Ends With Ring 12mm Long - Fits Up To 6.5mm Cord (4)
Project uses 2 pieces. You will need 1 package.
- FHP-6257 - 22K Gold Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose